Manual

2-3-0-617/ISS1/FEB05
Wiring and Locking Mechanism
The bases used with the Addressable Remote
Indicator should be wired as shown in Fig 2
below. The CHQ-ARI(CLR) can also be locked
onto the relevant base by removing a plastic
lug on the underside of the remote indicator,
please refer to Fig 1. The Addressable Remote
Indicator can only then be removed by using a
special Removal Tool (TSC-A100/ALG) which
is available from Hochiki Europe (UK) Ltd.
A: Loop (+) B: Loop (-) C: Cable Screen
Hochiki Europe (UK) Ltd
Grosvenor Road, Gillingham Business Park,
Gillingham, Kent, ME8 0SA, England
Telephone: [phone] Facsimile: [phone]
Email: [e-mail]
Web: www.hochikieurope.com
Hochiki Europe (UK) Ltd. reserves the right to alter the
specification of its products from time to time without
notice. Although every effort has been made to ensure
the accuracy of the information contained within this
document it is not warranted or represented by Hochiki
Europe (UK) Ltd. to be a complete and up-to-date
description. Please check our web site for the latest
version of this document.
Fig 1
Remove tab carefully
using a pair of pliers
NOTE:
! Maximum current for
remote indicator is 10mA.
! Base fixing centres are
48mm to 74mm
! Maximum wire thickness is
2.5mm
2
/terminal
Fig 2