Ho choice' Digital Counting Scale Add: No.58, Building 3029, Huang Road, Auxin Town, Qinghai Area, Shanghai China Shanghai Huarache Industrial Co., Ltd.
~~ Table Of Content MEMO S.0pustingenvironmentand intensification 1. 4lnsialtzrion and notice oo WA Display And Button Instruction Operation Instruction ~~ 5 6.
4 Calibration Turn on the scale and rapidly repeat press “ZERO” button three time. “AU-CAL” will show on the lower right corner of the screen, then put equal or not less than 20% of full range weights on weighing pan, calibration finished. Notice: Calibrate your instrument using reference weights of the appropriate tolerance (class). An instrument can be no more accurate than the standard to which it has been compared. For assistance in the selection of reference weights, please contact the factory.
* Do not locate near magnetic materials or equipment/ instruments which use magnets in their design. * Avoid areas which have variations in room temperatures or have excessive room temperatures. Room temperatures above 40 or lower 0°C could affect instrument operation and accuracy.
3-6-2 Preset weight alarm (weight mode) 15kg 35kg | 40kg 1. Pressthe “Alarm” key to enter the mode. When the display is “weight” , press “Alarm” again to enter the mode setting. Division-C |05g| / |05g| this time, the screen displays "hL” and there are one or or oe 575230 mm two “” displays. 295*340*1 20mm 110V/60HZ or 220V/50HZ h” istheupperlimit,and” L" is the lower limit. Mode RS237 Optional alarms for the relative position of” “to"h” and “L". printer Optional 2.
2-2 Button instruction On/Off | Turns instrument On or Off. Switch 0 fui keys. Used for Sung numeric data for tare oo fuse sample number, sample weight, or limit number of checking. a. Decimal point. b. Long press for ALPS printer function | cE | Used for canceling the numeric setting data. ZERO a. Weight from Zero. b. Long press to exchange the quantity and weight Reduce gross weight on pan as tare weight. PCS/SET | Used for parts counting. WT/SET | Used for the alternation of changing normal counting a.
3-6-1 Preset number alarm (count mode) 1. Pressthe “Alarm” key to enter the mode. When the display is “count” , press “Alarm” again to enter the mode setting. At this time, the screen displays “hL” and there are one or two “7 displays. “h” is the upper limit,and” L” is the lower limit. mode alarms for the relative position and “L".
3-3-1 PCS/SET and WT/SET 1 PCS/SET *sample size can be changeable (1). Put the samples with noted quantity on the scale, directly input the actual quantities via numeric keys, then press “PCS/SET” to finish setting quantities, the counting window will follow to change. Meantime, the total weight window and unit weight window will follow to show the single unit weight and total weight.