Assembly

HODEDAH ®
FITTING OF ANTI-TIP SAFETY STRAP
STEP 1:
- Attach the mounting bracket (a) to the furniture in the
solid part below the top panel a few inches away from the
side of the unit.
- Screw (b) through the smallest hole of (a).
a
b
STEP 2:
- Locate a stud in the wall
behind the unit, does not
have to be centered
- Place the other mounting
bracket (a) on the wall
stud 2 inches below the
mounting bracket
secure to the back of
your unit.
- Attach to the wall stud
using (c) through the
smaller hole of (a).
d
c
a
STEP 3:
- Repeat the same step a few inches away from the
other side of the unit.
- Place the furniture into position so both mounting
brackets are vertically in line.
- Lace the end of the restraint strap through the
larger holes in each mounting bracket.
- Secure the strapsand lock into place.
FURNITURE
WALL
BACK SIDE OF
TOP PANEL
Mounting bracket
4 Pcs
a
b
Restraint strap
2 Pcs
d
14
Page
www.Hodedah.com
Screw m8 x 18mm
2 Pcs
c
Screw m8 x 50mm
2 Pcs