HODEDAH ® Assembly Instructions 2 people This instruction booklet contains important safety information, please read and keep for future reference. 90 mins ITEM # HI4DR-G (MOP-SP) 1 YR LTD 4 DRAWER CHEST 1 Box FRONT VIEW BACK VIEW Product Dimensions: Height 40.24" x Width 27.52" x Depth 15.51" Weight Capacity: Large Drawer 25Ib. | Small Drawer 20Ib. www.Hodedah.
HODEDAH ® Phone Mon - Fri | 9:30 am to 5pm EST 1 - 855 - HODEDAH Email Send us an email Support@Hodedah.com Website Visit our website to open a case www.Hodedah.
HODEDAH ® · Never open more than one drawer at a time. · The use of tip-over restranits may reduce but not eliminate the risk of tip-over. Let's get started… Helpful hints, read before beginning assembly · Make sure you receive all boxes. If your item is packed in one box, box count will read 1 · · · · of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second box will read 2 of 2. Read each step carefully.
HODEDAH ® Hardware List 1 Screw M6 x 40mm Pvc Cap 5 Mini Fix Pvc Cap 8 QTY 2 3 20 Pcs 10 Pcs 10 Pcs Screw M4 x 32mm QTY 32 Pcs Screw M3.5 x 14mm *For # 13 Drawer Slides QTY 6 QTY 6 Sets L Bracket 16 Pcs 6 Pcs 32 Pcs QTY Screw M6.3 x 13mm 9 1 Pc QTY 7 QTY 42 Pcs Pvc Dowel 10 70 Pcs Nail H-Profile 11 QTY QTY 1 Pc Allen Key QTY 16 Pcs Screw M6.2 x 10mm *For # 12 Drawer Slides www.Hodedah.
HODEDAH ® Accessories 12 * Fix On Side Panels Ⓐ Drawer Slide - A QTY 4 Sets *Fix On Side Panels A & F * Fix On Side Panels Ⓕ 13 * Fix On Drawer Side Panels Ⓘ * Fix On Drawer Side Panels Ⓙ 4 QTY Handle 4 Pcs Screw M4 X 30mm Drawer Slide - B QTY 4 Sets *Fix On Side Panels I & J 8 Pcs Important 1. Before you throw the package, please use the Check Box to identify the parts and hardware to ensure that you have everything you need. 2. Check and measure the bolts before applying them to parts. 3.
HODEDAH ® Parts List A Left Side Panel 1003x 387 x 15mm QTY B Kick Panel (Front) 603 x 105 x 15mm 1 Pc D Kick Panel (Back) & Back Strengthening Panel 603 x 300 x 15mm QTY Top Panel 699 x 394 x 15 mm QTY E Front Strengthening Panel 603 x 89 x 15mm Drawer - Right Side Panels 338 x 140 x 15mm QTY H Drawer Front Panels 597 x 222 x 15mm Drawer Support Panel 338 x 51 x 15 mm QTY 4 Pcs www.Hodedah.
HODEDAH ® The Breakdown G N F D E A C B J K I M L H www.Hodedah.
HODEDAH ® Pre - Assembly A and F 's non-thru holes as shown, using hammer to gently tap them in. 2. Place the drawer slide A ⑫ onto the 2 holes area shown at left side panels A and F. Then tighten 1. Insert the pvc dowels ⑦ to panels it with 2 screws ⑪ and 1 screw ③. Do the same for the 3 other slide A ⑫. A and F as shown. 4. Insert the mini fix ⑤ (nuts) with the cross arrow mark facing upward and aim to panels A and F 's top thru 3.
HODEDAH ® Pre - Assembly Insert the pvc dowels ⑦ to both end of the panels B,C,D and E. Using hammer to gently tap them in. 7 7 7 D L E N 7 PA 7 E L E PAN 7 7 7 7 7 C L E PAN 7 7 Insert the mini fix ⑤(nuts) with the cross arrow facing outward and aim to panel B's thru hole. Insert, push down and tighten mini fix screw ⑤, to the non-thru hole of the panel G as shown, 4pcs. 5 Mini Fix 2 Pcs. 5 Mini Fix 4 Pcs. 7 Pvc Dowel 14 Pcs. 5 7 B L E AN 5 7 P 5 5 5 5 G L E AN P www.Hodedah.
HODEDAH ® Assembly Of Drawers : 4 DRAWERS Place L bracket and ensure its shorter part contact on panels I and J 's non-thru holes as shown, then tighten them with screws ⑥. Insert the PVC dowels ⑦ to end of the panels I to J. Using hammer to gently tap them in. Place panels I and J on 2 (1) 2 K I 2 2 6 7 7 6 6 x4 each side of panel K as shown. Then tighten screw ② to panels I and J 's upper thru holes to fix them onto panel K. DRAWER G (2) K J H 7 2 Screw M4 x 32mm 16 Pcs.
HODEDAH ® Assembly Of Drawers : 4 DRAWERS Flip drawer with bottom side up, place panel L onto panels I, J and K and insert panel L to groove of panel H. (3) H L I K J x4 3 (4) 13 7 2 M 9 7 3 H 13 L I K J x4 Then nail the nails provided with hammer on the L border of panel as shown.The gap between 2 nails should be about 100mm. After that, place drawer slides B ⑬ with the small white roller facing outward and with other end tip H onto each bottom side (angle) edge of panels I and J.
HODEDAH ® Assembly Of Drawers : 4 DRAWERS 4 (4) I Screw M4 X 30mm 8Pcs. K 4 4 H 4 Handle 4 Pcs. J x4 Flip drawer over with bottom side down, tighten 2 screw ④ from inner side of panel H into the handle ④'s holes. COMPLETED www.Hodedah.
HODEDAH ® Step 1 * Place and fix Panels B,C,D,E onto Panel A by inserting the (Left) dowels onto the non-thru holes at Panel A. * Using allen key ⑩ to tighten screws ① from the 5 thru holes of panel A , one by one. * Tighten mini fix clockwise to lock mini fix up. Dowel / Mini Fix Installation E B 1 A D C 1 1 1 1 Screw M 6 x 40mm 5 Pcs. www.Hodedah.com 10 1 Allen Key 1 Pc.
HODEDAH ® Step 2 B,C,D,E onto Panel F by pushing and slotting the (Right) dowels onto the non-thru holes at Panel F. * Using allen key ⑩ to tighten screws ① from the 5 thru holes of panel F, one by one. * Place and fix Panels * Tighten mini fix clockwise to lock mini fix up. Dowel / Mini Fix Installation A E B 1 D F C 1 1 1 1 Screw M 6 x 40mm 5 Pcs. www.Hodedah.com 10 1 Allen Key 1 Pc.
HODEDAH ® Step 3 Place and fix panel G onto panels A and panel F, and align properly by inserting the 4 (down) mini fix screws ⑤ onto the L-thru holes at top edge of panel A and F. At the same time, inserting panel A and panel F 's upside dowels going onto panel G 's non-thru holes. Dowel / Mini Fix Installation G F A 5 Mini Fix Cap 4 Pcs. *Then, tighten mini fix ⑤ clockwise to lock the mini fix up for tightening panel G up.
HODEDAH ® Step 4 Lay the main unit at face down position, Place the back Panels N onto the back of the main unit, and join the 2 panels N together with H-profile by slotting one side each of panels N into the track of H-profile. Then align them properly for nailing. Then use hammer to nail the nails one by one and at center of 4 side edges. Gap between 2 nails should be about 100mm for all. 100 N 8 N A 9 www.Hodedah.com Nail 24 Pcs. 8 H-Profile 1 Pc.
HODEDAH ® Step 5 * Lift up the main unit carefully and let it stand up properly. * Cover all the screws ① 's head with the PVC cap provided by pushing the cover's stem onto the hole of screw head one by one for all screws on panels A and F. * Take all drawers , and slide them (the white rollers at drawer slide at both side of drawers are to go into the track of the slides at each side panel.) all the way gently, one drawer by one drawer starting from bottom one G A H F H 1 1 H 1 1 1 PVC Cap 10 Pcs.
HODEDAH ® FITTING OF ANTI-TIP SAFETY STRAP STEP 1: · Attach the mounting bracket a to the furniture in the solid part below the top panel a few inches away from the side of the unit. · Screw b through the smallest hole of a . STEP 2: · Locate a stud in the wall behind the unit,does not have to be centered. BACK SIDE OF TOP PANEL · Place the other mounting bracket a on the wall stud 2 inches below the mounting bracket secured to the back of your unit.
HODEDAH ® Completion Enjoy & Thank you for purchasing from Hodedah! www.Hodedah.
