HODEDAH ® Assembly Instructions 2 peoples This instruction booklet contains important safety information, please read and keep for future reference. 30 mins ITEM # HI425-G 1 YR LTD NIGHT TABLE 1 Box FRONT VIEW BACK VIEW Product Dimensions: Height 29.52" x Width 47.24" x Depth 23.62" Weight Capacity Per Drawer 15lbs www.Hodedah.
HODEDAH ® Phone Mon - Fri | 9:30 am to 5pm EST 1 - 855 - HODEDAH Email Send us an email Support@Hodedah.com Website Visit our website to open a case www.Hodedah.
HODEDAH ® · Never open more than one drawer at a time. · The use of tip-over restranits may reduce but not eliminate the risk of tip-over. Let's get started… Helpful hints, read before beginning assembly · Make sure you receive all boxes. If your item is packed in one box, box count will read 1 · · · · of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second box will read 2 of 2. Read each step carefully.
HODEDAH ® Hardware List QTY 1 2 25 Pcs Pvc Dowel QTY 3 2 Pcs QTY 16 Pcs Screw M3.5 x 14mm M3x16mm Screw *For # 13 Drawer Slides 4 QTY 5 8 Pcs Screw M4 x 32mm QTY 6 8 Pcs QTY 10 Pcs Screw M6 x 40mm Screw M6.2 x 10mm *For # 12 Drawer Slides 7 QTY 10 Pcs 9 Mini Fix Pvc Cap Pvc Cap 11 QTY 14 15 Pcs Nail www.Hodedah.
HODEDAH ® Accessories QTY 12 * Fix On Side Panels Ⓐ * Fix On Side Panels Ⓕ Drawer Slide - A 2 Sets *Fix On Side Panels A F QTY 13 * Fix On Drawer Side Panels Ⓙ 2 Sets Drawer Slide - B * Fix On Drawer Side Panels Ⓚ 8 *Fix On Side Panels J K QTY 2 Pcs Handle Screw M4 X 20mm 4 Pcs Important 1. Before you throw the package, please use the Check Box to identify the parts and hardware to ensure that you have everything you need. 2. Check and measure the bolts before applying them to parts. 3.
HODEDAH ® Parts List A Left Side Panel 735 x 394 x 15mm QTY B Back Strengthening Panel 976 x 90 x 15mm 1 Pc D Stand Panel 292 x 330 x 15mm QTY Top Panel 1200 x 600 x 15mm QTY E Front Strengthening Panel 342 x 76 x 15mm Right Drawer Side Panels 292 x 102 x 15mm QTY 2 Pcs www.Hodedah.
HODEDAH ® The Breakdown x2 www.Hodedah.
HODEDAH ® Step 1 A. Place the drawer slide A ⑫ onto the 2 holes area shown at stand panel D and F. Then tighten it with 2 screws ⑤ and 1 screw ③. D L E AN P P F L E AN B. Insert the mini fix ⑨ (nuts) with the cross arrow mark facing upward and aim to panel A,C,D & F 's top thru holes. (As shown) A L E AN P C. Insert the PVC dowels ① to panel A,B,C,D,E and P E L E AN F ’s non-thru holes as shown, using hammer to tap them in. L E N PA C 1 Pvc Dowel 17 Pcs. 3 Screw M3.5 x 14mm 4 Pcs.
HODEDAH ® Step 2 E onto Panels F by inserting the dowels onto the non-thru holes at Panel F. Next, fix Panel D onto panel E by inserting the dowels onto the non-thru holes at Panel D. Use allen key ⑭ to tighten 2 screw ⑥ from the thru-holes of panel D and F to non-thru hole of panels E as shown. Fix Panel 6 www.Hodedah.com Screw M6 x 40mm 2 Pcs.
HODEDAH ® Step 3 B, C & E onto Panels F by inserting the dowels onto the non-thru holes at Panel F. Next, fix Panel A onto panel B & C by inserting the dowels onto the non-thru holes at Panel A. Fix Panel Use allen key ⑭ to tighten 8 screws ⑥ from the thru-holes of panel A ,C and F to non-thru hole of panels B & C as shown. 6 www.Hodedah.com Screw M6 x 40mm 8 Pcs.
HODEDAH ® Step 4 G A,C,D & F -Fix panel onto panels and align properly by inserting the 4 dowels of panels A & F onto the non thru holes of panel G. -Pushing and light tapping of panel G to have panel A, G & F fix tightly. -Then, tighten mini fix ⑨ clockwise to lock the mini fix up for tightening panel G up. Cover 4 mini fix caps provided by pushing the cover 's stem onto the hole of mini fix nut on upper side of panel A,C,D and F. www.Hodedah.
HODEDAH ® Step 5 A. Insert the mini fix ⑨ (nuts) with the cross arrow mark facing upward and aim to I & J 's top thru holes. (As shown) B. Insert the PVC dowels ① to panel I and J ’s non-thru holes as shown, using panel hammer to tap them in. C. Insert, push down and tighten mini fix screw ⑨, to the hole as shown (Panel H) x2 x2 H EL I EL N A P N A P x2 J L NE PA 1 Pvc Dowel 8 Pcs. 9 Mini Fix 4 Pcs. www.Hodedah.com 9 Mini Fix 4 Pcs.
HODEDAH ® Assembly Of Drawers I and J on each side of panel H with Panel I and J 's PVC dowel insert to panel H 's non-thru hole and Panel H 's mini fix screws insert into Panel I and J 's thru as shown. Then tighten mini fix on panel I and J clockwise to -Place panel (1) lock mini fix up. I and J 's upper thru holes to fix up to the panel K. -Next tighten screw ④ to panel -Flip drawer with bottom side up, place L panel onto the drawer and align properly.
HODEDAH ® Step 6 Take drawers and slide them (the white rollers at drawer slide at both side of drawers are to go into the track of the slides at each side panel.) all the way gently, one drawer by one drawer starting from bottom one. Screw Cap www.Hodedah.
HODEDAH ® Job Complete Enjoy & Thank you for purchasing from Hodedah! In the interest of our environment please dispose of all packaging thoughtfully. www.Hodedah.
