HOTHEADED www.hodedah.com A IMPORTANT NOTE: » This product contains small components, please ensure that they are kept away from small children. « This instruction booklet contains IMPORTANT safety information. Please read and keep for future reference. * Note: you will find extra screws and bolts in hardware pack in case of any missing pieces. « If the glass is chipped or broken, do not attempt to assemble the item.
“4v HOTHEADED Top gps = www.hodedah.com SOR, Thank you for purchasing from Hotheaded To learn more about hotheaded and our products visit www.hodedah.com READ BEFORE BEGINNING ASSEMBLY -Read each step carefully. It is very important that each step of instruction is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur. -Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
‘58s HOTHEADED rh Dak www.hodedah.com SECT Step 1 » Put upper glass(1) on clear floor or carpet, aluminum tray side upwards. « Attach screw rod (5) on aluminum trays. Step 2 «Insert plastic casing through screw rod in sequence(5).
fi) HOTHEADED = rN Dat www.hodedah.com OAFS Step 3 » Put layer glass (2) through screw rod(5), painting side upwards. step « Insert plastic washer (6) through screw rod(5).
{PR HOTHEADED : eh Dal www.hodedah.com SECT Step 5 « Insert table leg tube (4) through screw rod(5). Step 6 « Insert steel footing (7) and rubber mat (8) through screw rod (5). » Fix steel washer (B) and nut (A) on screw rod by wrench (C).
HOTHEADED www.hodedah.com Step 7 * Turn over the stand and place it on the floor. Job Complete ! In the interest of our environment please dispose of all packaging thoughtfully. WARNING! 1. MAKE SURE ALL SCREWS HAVE BEEN PROPERLY TIGHTENED BEFORE USING COFFEE TABLE 2.DO NOT PLACE VERY HOT OR VERY COLD ITEMS ON THE GLASS SURFACE UNLESS ADEQUATELY THICK TABLE MATS ARE USED TO PREVENT SUCH ITEMS FROM COMING INTO DIRECT CONTACT WITH GLASS SURFACE 3.DO NO SIT OR STAND UPON THE GLASS SURFACE 4.
