Assembly

www.Hodedah.com
9 | Page
HODEDAH
®
FITTING OF ANTI-TIP SAFETY STRAP
STEP 1:
· Attach the mounting bracket a to the furniture in the
solid part below the top panel a few inches away from the
side of the unit.
· Screw b through the smallest hole of a .
BACK SIDE OF
TOP PANEL
STEP 2:
· Locate a stud in the wall
behind the unit,does not
have to be centered.
WALL
· Place the other mounting
bracket a on the wall
stud 2 inches below the
mounting bracket
secured to the back of
your unit.
· Attach to the wall stud
using c through the
smaller hole of a .
FURNITURE
STEP 3:
· Repeat the same step a few inches away from
the other side of the unit.
· Place the furniture into position so both mounting
brackets are vertically in line.
· Lace the end of the restraint strap through the
larger holes in each mounting bracket.
· Secure the straps and lock into place.
Mounting bracket
4 Pcs.
TP 6#x5/8'' Screw
2 Pcs.
TP 8#x2'' Screw
2 Pcs.
Restraint strap
2 Pcs.