Assembly

· Never open more than one drawer at a time.
· The use of tip-over restraints may reduce but not eliminate the risk of tip-over.
www.Hodedah.com
3 | Page
Let's get started…
Helpful hints, read before beginning assembly
· Make sure you receive all boxes. If your item is packed in one box, box count will read 1 of 1, likewise if
your item is packed in two boxes, box count will read 1 of 2 and second box will read 2 of 2.
· Read each step carefully. It is very important that each step is performed in the correct order. If these
steps are not followed in sequence, assembly difficulties will occur.
· Work in a spacious level area, preferably carpet, near the place the unit will be used.
· DO NO USE power tools to assemble your furniture, it will strip and damage parts.
· Your package should include the following hardware and parts. Parts are labeled or stamped on the raw
edge. Please inspect contents to ensure you have received all components. If you are missing any
hardware or parts please contact customer service right away before assembly.
Assembly Tools Required (not supplied)
Product Care and Maintenance
· Wipe clean with dry soft cloth, never use chemicals or cleaning products they will damage the finish.
· Avoid placing your furniture in direct sunlight, as sunlight causes fading.
· Never push, drag or pull your furniture, to move to a new location carefully with two or more people carry
the unit to its new location.
· Avoid extreme changes in temperature by arranging furniture away from radiators, heat and air vents and
air conditioning units.
Hammer Phillips Screwdriver Tape Measure No Power Tools Needed
HODEDAH
®