HODEDAH ® Assembly Instructions 2 people This instruction booklet contains important safety information, please read and keep for future reference. 120 mins ITEM # HID8020-G(MOP-SP) 1 YR LTD 3 DOOR WARDROBE 2 Boxs FRONT VIEW BACK VIEW Product Dimensions: Height 72.01" x Width 35.98" x Depth 20.98" Weight Capacity Per Drawer 25lbs Weight Capacity Per Shelf 25lbs www.Hodedah.
HODEDAH ® Phone Mon - Fri | 9:30 am to 5pm EST 1 - 855 - HODEDAH Email Send us an email Support@Hodedah.com Website Visit our website to open a case www.Hodedah.
HODEDAH ® · Never open more than one drawer at a time. · The use of tip-over restranits may reduce but not eliminate the risk of tip-over. Let's get started… Helpful hints, read before beginning assembly · Make sure you receive all boxes. If your item is packed in one box, box count will read 1 · · · · of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second box will read 2 of 2. Read each step carefully.
HODEDAH ® Hardware List QTY 2 3 QTY 8 Pcs QTY 5 34 Pcs Pvc Dowel Shelf Support QTY 22 Pcs Screw M6 x 40mm QTY 9 56 Pcs 10 20 Pcs QTY 6 Sets Screw M4 x 32mm Screw M3.5 x 14mm QTY 7 1 Pc Allen Key 8 1 Pc Hanging Rod QTY 6 2 Pcs V-Bracket QTY 4 Hinges *For # 19 Drawer Slides 11 QTY QTY 12 3 Sets 14 18 Pcs Screw M 10 X 1/2 MM Hinges QTY 17 AIM 20 8 Pcs Screw M6.2 x 10mm *For # 18 Drawer Slides www.Hodedah.
HODEDAH ® Accessories 18 * Fix On Side Panels Ⓐ Drawer Slide - A * Fix On Side Panels Ⓖ *Fix On Side Panels A & G 19 * Fix On Drawer Side Panels Ⓠ Drawer Slide - B * Fix On Drawer Side Panels Ⓠ 1 QTY Handle 5 Pcs Screw M4 X 32mm QTY 2 Sets QTY 2 Sets *Fix On Side Panels Q 10 Pcs Important 1. Before you throw the package, please use the Check Box to identify the parts and hardware to ensure that you have everything you need. 2. Check and measure the bolts before applying them to parts. 3.
HODEDAH ® Parts List A Left Side Panel 1816 x 495 x 15mm QTY B Kick Panels 860 x 89 x 15mm Bottom Panel 860 x 494 x 15mm QTY D Partition Panel 570 x 493 x 15mm 1 Pc F Top Panel 902 x 527 x 30mm QTY Right Side Panel 1816 x 495 x 15mm QTY 1 Pc www.Hodedah.
HODEDAH ® Parts List L Right Door 1722 x 293 x 15mm QTY M Upper Drawer Front Panel 590 x 253 x 15mm 1 Pc O Back Panels 1739 x 295 x 3mm QTY Drawer End Panels 513 x 138 x 15mm QTY 2 Pcs www.Hodedah.
HODEDAH ® The Breakdown x2 www.Hodedah.
HODEDAH ® Pre - Assembly 1 Insert the PVC dowels ③ to panels A, I and G ’s non-thru holes , using hammer gently to tap them in. 2 Place the drawer slide onto the 2 holes area A⑱ A shown at side panel and Then fasten it with 2 screws ⑰ and 1 screw ⑧. 5 V-BRACKET 2 Pcs. PAN EL 11 G. A 17 HINGES 3 Pcs. PAN EL Screw M6.2 x 10mm 8 Pcs. G 3 Pvc Dowel 8 Pcs. 2 SHELF SUPPORT 8 Pcs. 3 fasten V-Bracket ⑤ on panels A and G by using 2 screws ⑧. 8 Screw M3.5 x 14mm 26 Pcs.
HODEDAH ® Pre - Assembly PAN PAN EL EL D PAN EL PAN E EL C H Insert PVC dowels ③ to panels B, B1, C, D, E, H, Q, R and U ’s non-thru holes , using hammer to gently tap them in. B1 L E N A P PAN www.Hodedah.com EL B PAN EL B 3 Pvc Dowel 26 Pcs.
HODEDAH ® Door Panel Assembly * Insert 6 Hinges ⑩ and 3 hinges ⑪ into door panels J,K and L 's non-thru hole , then fasten screws ⑧ through hinges ⑩ and ⑪ 's thru hole. 10 HINGES 6 Pcs. 8 11 Screw M3.5 x 14mm 18 Pcs. HINGES 3 Pcs. -Fasten 2 screws ① from inner side of panels J,K and L into the handle ① holes. Disassemble the lock ⑮ into 5 parts ,then install the lock ⑮ by insert the lock ⑮ 's cylinder into middle thru hole of door panel L, then fix the lock up. Handle 3 Pcs. 1 SCREW M4 X 32mm 6Pcs.
HODEDAH ® Assembly Of Top Drawer (1) -Place panel Q on each side of panel M . -Then, fasten screw ⑨ to panel Q 's lower thru holes to fix them onto panel M. -Next fasten screw ⑨ to panel Q 's upper thru holes to fix up to the panel R. -Flip drawer with bottom side up, place panel S onto the drawer and align properly. Then nail the nails provided -Then tighten screw ⑨ to panels T 's thru holes to fix them onto panels S, M and R. (2) with hammer on the border of panel S .
HODEDAH ® Assembly Of Bottom Drawer (1) -Place panel Q on each side of panel N . -Then, fasten screw ⑨ to panel Q 's lower thru holes to fix them onto panel N. -Next fasten screw ⑨ to panel Q 's upper thru holes to fix up to the panel R. -Flip drawer with bottom side up, place panel S onto the drawer and align properly. Then nail the nails provided with (2) hammer on the border of panel S .The gap between 2 nails is about 100mm.
HODEDAH ® Step 1 Fix Panel B1 onto 2 Panels B by inserting the dowels onto the respective non-thru holes at Panel B. Next, fix Panel B1 and 2 Panels B onto panel C by inserting the dowels onto the non-thru holes at Panel C. Fix panel G onto panel C by inserting panel G 's lower dowel onto non thru holes of panel G. Use allen key ⑥ to fasten 2 screws ⑦ from the thru-holes of panel C to non-thru hole of panel G . 7 www.Hodedah.com Screw M 6 x 40mm 2 Pcs. 6 Allen Key 1 Pc.
HODEDAH ® Step 2 Fix Panel D and E onto Panels G by inserting the dowels onto the non-thru holes at Panel G. Using allen key ⑥ to fasten screw ⑦ from the 3 thru holes of panel G, one by one. Fix Panel A onto Panels B, C, D and E by inserting the panel B, C, D and E 's dowels onto non-thru holes at Panel G. Using allen key ⑥ to fasten screw ⑦ from the 5 thru holes of panel G , one by one. 1 7 Screw M 6 x 40mm 10 Pcs. 6 Allen Key 1 Pc. 360° www.Hodedah.
HODEDAH ® Step 3 Place and fix Panel H onto Panel G by inserting the (Left) dowels onto the non-thru holes at Panel G. Using allen key ⑥ to fasten screw ⑦ from the 2 thru holes of panel G. Fix Panel I onto Panels B, C, and H by inserting the panel B, C and H 's dowels onto non-thru holes at Panel I. Using allen key ⑥ to fasten screw ⑦ from the 4 thru holes of panel I. 360° 7 www.Hodedah.com Screw M 6 x 40mm 8 Pcs. 6 Allen Key 1 Pc.
HODEDAH ® Step 4 Fix panel F onto panels A, G and I and align properly by inserting the 6 dowels of panels A,G and I onto the non thru holes of panel F. Pushing and light tapping of panel F to have panel F, panel A, panel G and panel I fix tightly. Use allen key ⑥ to fasten screws ⑦ from the thru-holes of panel F. 7 Screw M 6 x 40mm 2 Pcs. 14 www.Hodedah.com Screw M 6 x 50mm 4 Pcs. 6 Allen Key 1 Pc.
HODEDAH ® Step 5 -Lift up the main unit carefully and let it stand up properly. -Place iron tube onto both panels A and G 's V-bracket. -Put adjusting panels P onto shelf supports . -Take drawers (drawers M and N), and slide them (the white rollers at drawer slide at both side of drawers are to go into the track of the slides at each side panel.) all the way gently, one drawer by one drawer starting from bottom one. 4 www.Hodedah.
HODEDAH ® Step 6 Join the door panels J, K and L 's hinges with panels A, G and I 's hinges . You can align the door by fastening and loosening the screws . Adju s t Adju s t www.Hodedah.
HODEDAH ® Step 7 O onto the back of the main unit, and join 2 panels O together with H-profile by slotting one side each of panel O into the track of H-profile. Then align them Place 2 back Panels properly for nailing. Then use hammer to nail the nails one by one and at center of 4 side edges. Gap between 2 nails should be about 100mm for all. Cover all the screws ⑦ and screws⑭ ’s head with PVC cap ⑯ provided by pushing cover’s stem onto the hole of screw heads one by one for all screws.
HODEDAH ® FITTING OF ANTI-TIP SAFETY STRAP STEP 1: · Attach the mounting bracket a to the furniture in the solid part below the top panel a few inches away from the side of the unit. · Screw b through the smallest hole of a . STEP 2: · Locate a stud in the wall behind the unit,does not have to be centered. BACK SIDE OF TOP PANEL · Place the other mounting bracket a on the wall stud 2 inches below the mounting bracket secured to the back of your unit.
HODEDAH ® Job Complete Enjoy & Thank you for purchasing from Hodedah! In the interest of our environment please dispose of all packaging thoughtfully. www.Hodedah.
