Submittal Sheet

110

UMPS

Pumps

Boiler Feed Units (Stock, continued)

Discharge Pump

Pressure Capacity Motor Receiver

Model Part Sq. Ft. Boiler Total Storage Storage

Number Number EDR Pumps HP (kW) PSIG (kPa) GPM (LPS) HP (kW) Gal (Liters) Gal (Liters) Minutes

30VBFS-B 161024 4,200 Simplex 30 (22) 20 (138) 9 (0.6) 1/3 (0.2) 30 (114) 18 (68) 9

30VBFD-B 161025 Duplex

50VBFS-B 161001 7,000 Simplex 50 (37) 20 (138) 15 (0.9) 1/3 (0.2) 50 (189) 39 (148) 11

50VBFD-B 161002 Duplex

100BFS-B 161003 13,800 Simplex 100 (75) 20 (138) 15 (0.9) 1/3 (0.2) 100 (379) 83 (314) 11

100VBFD-B 161004 Duplex

200VBFS-20 161026 27,800 Simplex 200 (149) 20 (138) 30 (1.9) 1/2 (0.4) 200 (757) 172 (651) 12

200VBFD-20 161027 Duplex

200VBFS-30 161006 27,800 Simplex 200 (149) 30 (207) 30 (1.9) 1 (0.7) 200 (757) 172 (651) 12

200VBFD-30 161007 Duplex

Ordering Information

Open drip proof motors only. Single phase, 60Hz, 115/230 volt.

• For systems up to 27,800 sq. ft. EDR or up to

200 (149 kW) Boiler HP

• Vertical steel receiver with mounting feet

• Available with pumps in simplex or duplex design

• Low height NPT inlet for easy return line piping

• Separate NPT connections provide a secondary vent

for safe operation

• NPT drain connection

• Float operated internal water make-up water feeder

• 100% factory tested as a complete unit

• Includes water level gauge with protective brass rods

and shut-off valves

• Optional equipment

— Inlet basket strainer

— Y-strainer

— Control panels for wall mounting

• Pump seal maximum temperature 250˚F (121°C)

• Pump maximum temperature

207˚F (97°C) —Model 200VBFS-30 & 200VBFD-30

210˚F (99°C) — All other Models

Series VBF

Series VBF Simplex Design

Series VBF Duplex Design