Brochure

56
Electronic Temperature Control Pilots
Series GT610-IP Electro-Pneumatic Transducer
The Series GT610-IP Electro-Pneumatic transducer
is designed for temperature control applications with a 35
psig (2.4 bar) clean filtered air supply and where a 4 to 20
mA DC or 0 to 10 VDC signal is provided by an elec tronic
sensor. An Air Pressure Pilot, an Air PRV Regulator
and a Series 2000 Main Valve Steam Regulator must be
used with the Series GT610-IP Relay.
• 6-30 psig (.42 - 2.1 bar) modulated air output
• Optional gauge ports available to monitor output signal
• Supply pressure:
Minimum 15 psig (1.0 bar)
Maximum 36 psig (2.5 bar)
• Maximum steam output pressure from main valve:
21 psig (1.5 bar) model AP-1 air pressure pilot
84 psig (5.8 bar) model AP-4 air pressure pilot
Ordering Information
Maximum
Model Part Input Air Pressure Weight
Number Number Signal psig (bar) lbs. (kg)
GT6108 401252 4 - 20 mA 36 (2.5) 2.5 (1.2)
GT6102 401253 0 - 10 VDC 36 (2.5) 2.5 (1.2)
ACCESS COVER
FOR ELECTRICAL
CONNECTIONS
RANGE ADJUST GROMMET
CONDUIT
CONNECTION
1/2 NPSM
TPC
ADJUST
OUTLET
(8mm)
INLET
(8 mm)
FRONT VIEW REAR VIEW
1.56
4.9375
(124)
2.12
SQUARE
Outlet
Inlet
AP Air
Pilot
GT-610-IP
Transducer
Air PRV
Regulator
High Pressure
Supply Air
Series 2000
Main Valve
Typical Installation
Refer to Ordering Information on:
– Air Pressure Control Pilots
– Air PRV Regulators
Regulators
Hoffman Specialty
®
RegulatorsHoffman Specialty
®
Regulators