User's Manual

User manual Vectron
   
© Höft & Wessel AG
page 13/70
Lin 02.02.2001 1.00 HW8660UserMan.doc Subject to amendment, errors excepted
3. Technical data
3.1 Hardware
Casing:
Robust casing made of 100% reusable ABS-plastic, with integrated ring for
shoulder strap.
Dimensions:
L 156 mm, W 83 mm, H 35,5 mm.
Weight:
approx. 337 g (without accu block), less than 400 g (with accu block).
Strengthening:
Lateral grip edges.
Electronic pen for
touch function:
pen holder located top right on side of display
Processor:
Motorola MC 68328 „Dragonball“, 16,58 MHz.
Operating system:
HW-DOS.
Programming:
Choice of different languages (Assembler, High Level Languages C and C++,
...).
Memory:
Internal memory
1 MB S-RAM, can be apported into 512 kB TPA and 512 kB RAM-disk.
Flash:
1 MB, alternatively equipped with 2 MB.
Display:
Analog-resistive touch sensitive film.
Graphics type with 240 x 320 points , ¼ VGA Supertwist.
LED-background lighting.
Contrast adjustment via software.
Dimensions:
Module size 70,1 x 92,1 x 9,0 mm LxWxH.
Actual displayed size 60,6 x 79,8 mm.
Dot Size 0,225 x 0,225 mm.
Dot Distance 0,24 x 0,24 mm.
Keyboard:
Elastomer sheeting with 4 x 4 keys.
4 freely programmable function keys below display.
Backlighting (soft keys excluded).
Power supply:
Via separate NiCd-accu block HW 19196 (3,6 V).
Working time:
approx. 1000 re-charging cycles.
Data security:
Data safeguard of current program state (e.g. during change of accu pack) in
internal memory for 2 min. with gold-cap capacitor.
radio module:
HW 86020; integrated in casing.
Antenna
Wire antenna λ/4, omnidirectional, integrated in casing.
Frequency range
2.03 – 2.480 GHz
Communication
According to FCC part 15;
Uses frequency hopping;
Propritary protocol;
Radio data rate
24 kbps.
Range
In obstacle-free open areas upto 300 m, less in buildings,
depending on conditions.
Connections
Serial 3,3 V interface, incl. status lines.
Power supply
Via terminal unit.