User's Manual

User manual Vectron
   
© Höft & Wessel AG
page 17/70
Lin 02.02.2001 1.00 HW8660UserMan.doc Subject to amendment, errors excepted
4. Power supply of HW 90196 with accu block HW 19196
The power supply of HW 90196 is realised by an accu block which is inserted in the device.
The accu block HW 19196 consists of a module of 3 NiCd-cells with a total capacity of 1000 mAh.
The accu block HW 19196 has been specifically designed for use in the HW 90196. Contacting is realised
by two high-current contacts which are sunk in sockets to avoid unintentional short-circuits.
fig. 3: HW 19196, frontal view
4.1 Technical data
Type:
Separate ABS-plastic casing (Snap-In technique) with NiCd-accus;
3 cells, each 1,2 V.
Dimensions:
L approx.64 mm, W approx. 47 mm.
Weight:
Approx. 76 g.
Nominal capacity:
1.000 mAh
Working life:
approx. 1000 re-charging cycles.
Safety features:
Sunk-in contacts against short-circuits.
Contacts:
2 high-current contacts.
Optional 3
rd
contact for charging condition monitoring via HW 90196.
Spring mounted design in plastic inset, self-centering form
High-current contacts