User's Manual

User manual Vectron
   
© Höft & Wessel AG
page 21/70
Lin 02.02.2001 1.00 HW8660UserMan.doc Subject to amendment, errors excepted
5.1 Operating system-basic menu
300
- HW 90196 - 8  320 (system-Info)
9  326 (checking RAM-/FLASH-Disk)
 327 (checking RAM-/FLASH-Disk)
↙
↙↙
↙ (Entry)  305 (if no application programm is existing)
 310 (if program is already existing)
0  302 (choose language)
additional inputs:
6 0 12 0 52  (format Flash-Disk, see 5.4)
3 0 1 4 1 5 9 0  (auxiliary program for user, e.g. setting of accu charging condition,
radio module configuration and -update, ...)
After having pressed the 9-key, the system starts to check its disks. If no errors are detected on the disks,
the device executes a warm-start. By pressing the C-key, the basic menu of the operating system is
called again.
326
- HW 90196 -
Checkdisk B: OK
File system B: OK
WBoot -> C
C  300 (Operating system-basic menu)
The HW 90196 presents the following display, if an error has been detected on one of its disks:
327
- HW 90196 -
Checkdisk B: Error
F-CBoot ! -> C
The application program has to be deleted in order to avoid non-defined program conditions and has to
be downloaded again in order to take the HW 90196 back into operation.