User's Manual

User manual Vectron
   
© Höft & Wessel AG
page 25/70
Lin 02.02.2001 1.00 HW8660UserMan.doc Subject to amendment, errors excepted
5.4 Format FLASH-Disk
Note!
The procedures described in this chapter will delete all data and programs on the HW
90196 and should thus be executed only in emergency cases!
The FLASH-disk in the HW 90196 is administered as a virtual hard disk. In order to delete all files on a
disk, it has to be formated anew just as a floppy or a HD.
The process starts with the following display:
300
- HW 90196 - For a correctly entered code  375
(do not press the enter-key)
The following code has to be entered:
" 6 0 12 0 52 "
The procedure may be repeated starting from display 300, if necessary.
375
format flashdisk? For a correctly entered code  380
any key  300 system menu
The following code has to be entered:
" 3 0 1 4 1 5 9 0 "
Any other key will cancel the process while the system goes back to menu 300.
380
formatting
disk B:
automatically
 385
The progress of the action is indicated by a rotating bar (*).