User's Manual

User manual Vectron
   
© Höft & Wessel AG
page 33/70
Lin 02.02.2001 1.00 HW8660UserMan.doc Subject to amendment, errors excepted
6.1 Technical data
6.1.1 Hardware
Casing:
Robust ABS-plastic casing with fastening facilities for belt
Dimensions:
L 133 mm, W 98 mm, H 64 mm.
Weight:
Ca. 446 g incl. rechargable battery, ca. 280 g without battery.
On/Off switch:
Key design.
Printing unit:
High-speed thermal printer,
fixed thermal head,
Easy Paper Load Technology,
Loosening of fricitional drum with lever mechanism.
Printing speed:
Up to 27 mm/s.
Width of paper:
58 mm +0 / -1 mm.
Actual width of print:
48 mm.
Paper cutting:
Stainless blade with saw tooth.
Paper control:
Detects end of paper.
Optical indication:
1 red LED and 1 green LED on operational frontside.
Power supply:
With NiCd battery block HW 19195
Separate battery block with 5 x 1,2 V cells, 1100 mAh each
Working time:
At full operation: ca. 8 h. Switch off after operation.
Interface IR:
1 infrared interface, 56,7 kBit/s (top side).
Radio module:
HW 86020 , integrated in casing.
Antenna
Wire antenna λ/4, omnidirectional, integrated in casing.
Frequency
range
2.03 – 2.480 GHz
Communication
According to FCC part 15;
Uses frequency hopping;
Propritary protocol;
Radio data rate
24 kbps.
Range
In obstacle-free open areas upto 300 m, less in buildings,
depending on conditions.
Connections
Serial 3,3 V interface, incl. status lines.
Power supply
Via terminal unit.
Magnetic card reader:
Integrated in casing.
3 tracks readable, according to ISO 7811.
Type: American Magnetics Type 45D, TRK3, art.no. T17645.
Read data of magnetic card are transmitted to terminal via radio transmis-
sion.
Standard paper reel:
30 mm outer diameter.
9 m Length at paper weight < 60 g / m².
Paper type:
TF50KS-E2C 65 µm (Nippon Paper Industries)
TP50KJ-R 65 µm
AP50KS-E 65 µm
HP220-AB1 65 µm (Mitsubishi Paper)
PD160R-N 75 µm (Oji Paper)