User's Manual

User manual Vectron
   
© Höft & Wessel AG
page 37/70
Lin 02.02.2001 1.00 HW8660UserMan.doc Subject to amendment, errors excepted
6.2.2 Function indication LEDs
A list of all LED-combinations will be shown in the following.
The green LED usually indicates the accu charging condition:
• on = „ok“,
• flashing = „low“ oder „discharged“.
The red LED indicates several error conditions:
• off = „ok“,
• on = „no paper“ resp. „open casing flap“,
• flashing = „no radio connection“.
Additionally, the green LED flashes every 2 seconds, if the printer is at sleep mode. Update processes
and the inital switch on from „off-mode“ are the exceptions.
Printer mode accu charg-
ing cond.
Status paper/
casing flap
Status radio
connection
green LED red LED
OFF - - - aus off
SLEEP - - - flash (ca. 0,5Hz) off
ON ok ok ok on off
ON ok Error - on on
ON ok ok Error on flash (ca. 2Hz)
ON low / discharg. ok ok flash (ca. 2Hz) off
ON low / discharg. Error - flash (ca. 2Hz) on
ON low / discharg. ok Error flash (ca. 2Hz) flash (ca. 2Hz)
Update / trans-
mission
- - ok flash (ca. 0,5Hz
at block size of
1kByte)
off
Update / pro-
gramming
- - ok off on
Tab. 1: optical indication of printer mode
6.2.3 Acoustic signals
The printer generates acoustic signals during certain operations.
Operation acoustic signal
Switch on of printer with on/off-key. Double whistle sound.
Printer turns to sleep mode. Whistle sound after app. 5 s (radio connection has
been interrupted).
radio connection is interrupted. Whistle sound as error indication.
Printer recieved command to read magnetic
card.
Beep sound as request to pull magnetic card through
slot of reading unit.
Magnetic card has been pulled through slot of
reader unit.
Beep sound after having pulled a magnetic card
through slot of reader unit.