User Manual

SKEYE.PAD XSL
Initial Steps
26 1.3 • 15.01.2007
2.5.12 Using (SD), PC, and CF Cards
The skeye.pad XSL is equipped with an extension slot for
CompactFlash cards (CF) and an extension slot for PC cards (also
referred to as PCMCIA). Depending on the variant (see chapter 2)
an extension slot for SD cards may also be available.
Each extension card requires a special Windows CE driver from the
manufacturer. The driver must support the Windows CE.net 4.2
device type and the Intel XScale PXA255 processor.
Information for users in the US:
According to the FCC rules (47CFR §2.1093) and procedures
(OET Bulletin 65 C) the use of extension cards with transmitting
capability (e.g. GMS, GPRS, WLAN, Bluetooth) is restricted to
those which have been evaluated in conjunction with the
skeye.pad XSL. Failure to comply with this requirement could
void the authority to operate the skeye.pad XSL and may
jeopardise the health of the user.
Prior to buying an extension card be sure those criteria are met.
Note that despite of using a new driver, the cards may be not
compatible.
To install a new driver, you usually need to set up an ActiveSync
connection (see chapter 7.2 ff.).
In addition, follow the instructions of the card manufacturer.