User Manual

INTRODUCTION
Safety Notes
1.3 • 15.01.2007 7
1. Introduction
1.1 Safety Notes
1.1.1 General Safety Notes
♦ Do not try to open, repair or modify your skeye.pad XSL. The
manufacturer will not be liable for any damage caused in that way.
♦ Any tampering by non-authorised persons will invalidate the
warranty.
♦ Do not use the skeye.pad XSL in damp environments (bathroom,
indoor pool, …). Protect the unit from any splashes of water or other
liquids.
♦ Never expose the skeye.pad XSL to very high temperatures e.g.
behind the windscreen of a motor vehicle.
♦ Only use your skeye.pad XSL with original equipment. Non-
compliance voids the warranty.
♦ Charge the storage battery using the chargers recommended by the
manufacturer only. Using another battery charger might be
dangerous and voids the warranty.
♦ The mains voltage must correspond to the technical data mentioned
on the battery charger.
♦ Keep the skeye.pad XSL out of the reach of small children.
♦ If your skeye.pad needs to be repaired or maintained, please contact
your specialised dealer
♦ Switch off your skeye.pad XSL when you are in explosive areas, for
instance in petrol stations, fuel depots, chemical plants, below deck
in ships, near blasting operations, in locations where a large volume
of dust particles (such as flour, wood or metal) is present in the air,
LPG-operated vehicles, etc.
We recommend to switch off the skeye.pad XSL completely (see
chapter 2.6).
This also applies to places where you are usually advised to switch
off your vehicle motor.
♦ Interference may be noticed near electric devices. Therefore, always
pay attention to local safety regulations.