User Manual V1.0（2020.
Download the App Hohem Pro Scan the QR code or search for " Hohem Pro " on the App Store or Google Play. Hohem Pro App Support iOS 9.0 and Android 5.0 or above. Product Overview 1. Phone Holder 14. Power Button (ON/OFF) 2． Folding Lock 15. Tilt Motor Lock 3． Pan Motor Lock 16. Type C 4． Battery Indicator 17. Reset 5． Zoom Slider 18. 1/4 inch Screw Port 6． Shutter 19. Roll Motor 7． Tilt Motor 20. Roll Motor Lock 8． Roll Motor Lock 21. Pan Motor Lock 9． Tilt Motor Lock 22.
③Make the “HOHEM” ④Put your phone stuck in the ⑤Slide the holder to the middle logo upward. bottom of holder and pull the head of phone to balance the gimbal. of holder to mount your phone. Clench the holder, ensuring that your phone is cling to the rubber mat, otherwise the gimbal would vibrate or turn off automatically. Booting up for the First Time Turn Bluetooth& Activate iSteady X For the first time, please turn on the stabilizer. Log into the Hohem Pro App to activate the stabilizer.
Controls and Operations？ 1 ② ③ ④ ① Power Button Press and hold to power on/ off. Tap to switch between landscape and portrait mode. Press twice to re-center the gimbal. ②Joystick Up/Down: Adjust tilt angle Right/Left: Adjust pan angle ③Slider（available in the App） Zoom in/ zoom out Focus ④Shutter Button Press once to take a photo Press twice to start or stop recording Press three times to switch between front and back cameras. Shutter Button Controls a.
Hohem Pro App Hohem Pro app also allows you to use Moment mode, Hyperlapse, Timelapse, Face-tracking 3.0, and Pano, or configure camera and gimbal settings in just a few taps. ⑥ 1 2 ⑦ 3 ⑧ 4 ⑨ ⑩ ⑤ 1. Home: tap to return to home. 2. Flash: Displays the flash status. 3. Front/Back Camera Switch. 4. Enable face tracking. 5. Z /F：Zoom in/out and focus. 6. Beauty cam and filter. 7. Moment：Refer to Number 7 for more information about Moment mode. 8. Video: tap to shoot a normal video. 9.
What are the Working Modes and Shooting Style？ Please enter into the Stabilizer Parameter Settings of Hohem Pro App to change the Working Mode and Shooting Style. Make sure the bluetooth connected in the App before changing the settings. Working Mode Follow Speed Default working mode: Camera follow the Pan & Tilt Follow direction along with rotation of pan General handle and tilt motor. Pan Follow Camera follow the direction along with rotation of pan handle.
Calibration Do not touch the gimbal and keep it on a static platform during calibration 1. Press five times 2. You will here a beep 3. LEDs blinks left to right 4. Two beeps mean completed FAQ 1.The gimbal works improperly (beep) after powering on for the first time. Activation is required through Hohem Pro App after powering on the gimbal for the first time. How to activate iSteady X? Please refer to page 4.
If the gimbal vibrates and the bluetooth light flashes by blue and red, the gimbal works improperly with beeps and turn off automatically after 3 seconds, it would be possible that your mobile phone is not properly mounted. 1. Mount your mobile phone before powering on the gimbal. 2. Attach your phone, ensuring that your phone is cling to the rubber mat. 3. Balance your phone by sliding the holder to the middle of phone. 4. Unlock all the 3 motors before powering on the gimbal.
After-Sales Information Visit https://www.hohem.com to learn more about after-sales service policies, repair services, and support. Call Center (Toll Free) This content is subject to change. Download the latest version from www.hohem.com iSteady is a trademark of Hohem Tech. Copyright © 2020 Hohem Tech All Rights Reserved.
