User's Manual

Booting up for the First Time
Turn Bluetooth& Activate iSteady X
For the first time, please turn on the stabilizer. Log into the Hohem Pro App to activate the stabilizer. If the
activation fails, it will not be enabled properly.
What to do if you fail to connect the Bluetooth or there is no pop-up of activation
a. Please make sure to enable the location service of phone and check if the Bluetooth connected
successfully.
b. When you need connect the native camera of Android devices, please make sure the bluetooth
of mobile phone is connected with gimbal Bluetooth name with prefix “iSX”.
c. Some of android devices would not with a pop-up of pairing request after launch the app, or the
pairing request is hidden in the notification bar without confirmation, which would cause the
failed connection of Bluetooth in your phone, please click the pairing request to get connection.
1 Startup
Long press the function key. When
it is turned on for the first time, it
will enter a to-be-activated state
and the Bluetooth indicator light
will flash “red and green”
alternately.
② Connect Bluetooth in the App
Turn on the phone's Bluetooth, open the APP, and
log into the home page. Follow the prompt at the
top and click “Connect”.
③ Activate iSteady X: After the Bluetooth is connected, an activation prompt box will pop up.
Click "Confirm" to complete the activation. After that, you will hear a prompt tone of ticking,
which means the stabilizer starts to work.
③Make the “HOHEM”
logo upward.
Clench the holder, ensuring that your phone is cling to the rubber mat, otherwise
the gimbal would vibrate or turn off automatically.
⑤Slide the holder to the middle
of phone to balance the gimbal.
④
Put your phone stuck in the
bottom of holder and pull the head
of holder to mount your phone.