User Manual V1.
Contents 0 1 Download the Hohem Pro App 02 iSteady X2 Overview 03 iSteady X2 Remote Control 05 Mounting and Balancing 06 Activation & Bluetooth Connection 07 Button Function 08 Working Mode & Follow Speed 1 0 How to fold the gimbal? 1 0 How to do if the gimbal is not level after powering on? 11 Use as emergency power bank 11 Power indicator and Bluetooth indicator function 12 Specifications 13 Warranty Card 14 Contact us Disclaimer and Warning Thank you for purchasing the Hohem product.
When powering on iSteady X2 at first use, activation is required through Hohem Pro app. iSteady X2 works after the activation. Important Notes: Mount your mobile phone before powering on iSteady X2. If no mobile phone is detected or the motor is overloaded due to phone is not level, the gimbal will shut down after a warning beeping. Download the Hohem Pro App Register and Login Scan the QR code to enter the download page Search " Hohem Pro " in the App Store or Google Play *Hohem Pro app requires iOS 10.
1. iSteady X2 Overview Phone Clamp 2. Folding Lock A 3. Folding Lock B 7 1 16 4. Battery Indicator 5. Zoom Slider 6. Shutter Button 2 7. Tilt Motor 8 8. Knob 9. Pan Motor 3 4 5 6 9 10 11 12 10. Bluetooth Light 11. Joystick 12. Power (ON/OFF) / Function Button 13 14 13. Bidirectional charging port (Type C) 17 15 18 14. Reset 15. 1/4 inch Screw Port 16. Roll Motor 17. Handle（Battery built-in） 18.
iSteady X2 Remote Control ① Power Button ON: Power On OFF: Power Off ② Shutter Button (Make sure the app connect to the gimbal successful) Single Press: Take photo, Start/End video Double Press: Switch the photo and video modes Triple Press: Switch the front and rear cameras (Only available in the app) ③ Function Button Single Press: Switch the landscape and portrait modes Double Press: Recenter the gimbal Triple Press: Inception (Auto rotation) ④ M Button (Gimbal Working Mode) Single Press: Pan&Tilt F
⑤ Navigation Buttons: Up/Down/Left/Right Up/Down： - Tilt Control（Indicator light shows green) - Control the image zoom in/out （Indicator light shows blue and only available in the app) ⑥ Indicator Light The indicator light shows green or blue in button operation. If no light shows, it means the remote control is not turned on or no battery.
How to mount and balance mobile phone on the gimbal? ① Unfold the gimbal ② Screw up the knob ③ Turn the “hohem” logo upward ④ Put your phone stuck in the bottom of phone clamp and pull the head of phone clamp to mount your phone ⑤ Slide the phone and make sure it is clamped in the middle, power on the gimbal after balancing the phone clamp The gimbal would work Clench the phone clamp, ensuring that your phone is improperly if not screw cling to the rubber mat, otherwise the gimbal would the knob u
Booting up iSteady X2 at first use Activation & Bluetooth Connection For the first time, please turn on the gimbal. Log into the Hohem Pro app to activate the gimbal. Gimbal will work improperly if not been activated. ① Startup Long press the function button. At the first start, it will enter a to-be-activated state and the Bluetooth indicator will flash alternatly in red and green. ② Bluetooth connection through the App Turn on the bluetooth of phone. Log into the app Hohem Pro.
Button Function ① Power (ON/OFF) / Function Button Long Press：Power On/Off Single Press：Switch the landscape and portrait modes Double Press: Recenter the gimbal Triple Press: Inception (Auto rotation) Press Five Times: Auto calibration Press Seven Times: Remote control pairing (For more details, please refer to page 4) The bluetooth light will flash alternatly in yellow and green. a. If the remote control is not paired within 30 seconds, the pairing will be cancelled; b.
How to switch working modes by button? Combination operation: Press and hold shutter button and tap power button Single Tap: Pan&Tilt Follow (Default) Double Tap: Pan Follow Triple Tap: All Lock Quartic Tap: POV (All Follow) *Tips: To ensure proper operation, please release the shutter button after the power button.
Pan Follow When you rotate the handle left/right, the camera will follow the handle movements. The tilt motor does not follow within the angle range of -30°~+30 movement, if exceed this range, the gimbal will follow the tilt movement, and the roll motor is locked without follow the movement. All Lock The roll and pan motors are locked without follow the movement. The tilt motor does not follow within the angle range of -30°~+30 movement, if exceed this range, the gimbal will follow the tilt movement.
How to fold Gimbal? How to do if the gimbal is not level after powering on? If the gimbal is not level after turned on, or pan axis is slight drift when the gimbal is still, please calibrate the gimbal on a stationary and horizontal surface.
Use as emergency power bank The gimbal can be used as emergency power bank for your mobile phone and other electronic devices.
Bluetooth Indicator Light 1. A.Blinks red and green alternatively: To be activated (at first use) B.Blinks yellow and green alternatively : The remote control is pairing 2. Color indicates the status of gimbal Green: Bluetooth is connected Yellow: Bluetooth is not connected Red: Warning of abnormal loads on the stabilizer or failed firmware upgrade 3.
Warranty Card User Name： Contact No.： Address： Purchase Date： 1. Within 15 days upon the purchase date. Any functional disorder or quality problem enjoys free repalcement service. But ensure the commodity and package with no damage, and we will offer a brand new replacement after confirming the product problem. 2. Warranty valid only under normal use. 3.
CALL CENTER -Toll Free UNITED STATES: +1(888)9658512 Mon-Fri: 9:00AM-5:00PM(EST) UNITED KINGDOM: +44(0)808 2737578 Mon-Fri: 2:00PM-10:00PM(GMT +0) Contact us Email: service@hohem.com Website：www.hohem.com Manufacturer: Hohem Technology Co.
