User Manual

16
Exit / Entry Delay
Entry Delay and Exit Delay are countdowns that allow you to enter and leave your home easily without
causing the alarm to sound.
Exit Delay
Exit Delay allows you to leave your home once you’ve armed the security system. When you place the
system into Away Arm Mode, it makes a countdown tick to let you know that it is preparing to arm.
Once the Exit Delay period ends, the system is armed. To give yourself enough time to exit your home
before the countdown ends, you can adjust the countdown timing from 0(No Exit Delay) to 255
seconds. The default Exit Delay is 40 seconds.
How to change the Exit Delay
Go to Menu>Settings>Delay>Exit Delay and enter to edit the delay value.
Entry Delay
Entry Delay allows you to enter your home and disarm your system while the system is in Away Arm
Mode. When you enter your home while the system is in Away Arm Mode, your hub makes a
countdown tick to let you know that you have a short time until your alarm goes off. When you hear this,
you should disarm your system as soon as possible. You can adjust the countdown timing from 0(No
Entry Delay) to 255 seconds. The default Entry Delay is 30 seconds.
How to change the Entry Delay
Go to Menu>Settings>Delay>Entry Delay and enter to edit the delay value.
How to Record a Voice Message by Panel
Your system can Record/Play/Delete a brief voice message (up to 20 seconds) that can be played
back later. The voice message will be played to the remote when a alarm call is connected.
Go to Menu>Record> and enter.
 Select Record.

Ready to record when Recording is shown and the system display will count down the recording
time remaining.
 Speak into the panel and the recording automatically stops after the time expires.

The panel plays back the message automatically.
 Press √ to save the message.
Go to Menu>Record>Duration to adjust the record time.
Go to Menu>Record>Play to playback the voice message recorded.
Go to Menu>Record>Delete to delete the voice message recorded.