User Manual

22
Schedule
You can set an arm schedule and a disarm schedule to
arm or disarm the system automatically at a daily time.
Go to Menu>Timer>Arm Timer/Disarm Timer and enter

Scroll to and tap ► to enable keypad, enter the Daily
Arm/Disarm time (in 24-hr) and tap √ to enter.

Scroll to and tap ► toggle to ‘on’ to enable the schedule.

Press √ to save your schedule.
Make a Call on Panel
On the home screen, tap , enter the number, then tap √ to dial.
Important: The call will be cancelled if cellular network is not registered, the system is armed or in
voice alarming.
Smart Hub Features
Battery backup
If the building has lost electrical power, Smart Hub includes a backup battery that will last for more
than 6 hours. So even if the power is out, Smart Hub can still detect when an intruder is in your home
and sound the alarm.
The battery icon in the upper-right corner shows the battery level or charging status, this level is just
for reference.
If the backup battery is very low, the battery icon turns red, and for up to 15 minutes before the hub
works well. And Low Battery notifications will be sent to the registered phone numbers.
The battery is fully charged within 8 to 12 hours.
Loss/Restoration of AC power
If the event of AC power loss or restoration, the hub will send you an alert notification to let you know
that.
Tamper detection
If someone tampers with Smart Hub and removes it from the back plate, the hub will send you an alert
notification to let you know that.
RESET TO FACTORY SETTINGS
You have two ways to reset Smart Hub to factory settings.
Go to Menu>Settings>Initialization> and enter, or press the TAMPER switch underneath the bracket
5 times.
Important: You won’t be able to reset if Smart Hub is locked. All the paired accessories and event logs
will be deleted when reset is done.
Arm Schedule
20:12
on