User's Manual

Technical Document Template Version 1.0 Page 23 of 88
4.6 Network
Note: Remember to click the save button to successfully apply changes.
• Network page includes TCP/IP, PPPoE and WiFi:
1. TCP/IP settings:
Image 14. Network page
a. MAC:
1 MAC Address
Display the MAC address information.
b. IPv4:
1
Obtain an IP address
automatically(DHCP)
Select this option to obtain an available dynamic IP
address assigned by the DHCP server each time the
camera is connected to the LAN.
2
Use the following IP
address
Select this
option to manually assign a static IP address
to the Network Camera.
3
O
btain DNS server address
automatically
A
utomatically use the DNS server settings provided by
the DHCP server.
4
Use the following DNS
server address
Select this option to
assign a DNS server address.
When DHCP is disabled, you also need to provide the
camera with valid DNS settings.
c. IPv6:
1 IP Address
The IPv6 IP address of camera is automatically
assigned by converting the MAC address of the IP
camera. Users are unable to modify it.
d. HTTP:
1 HTTP Port
Default:80
Value 1124~65534
The default value is 80. If you changed the HTTP port
to a different value (e.g. 1024), please make sure to
restart the camera (Settings > Advanced>
Maintenance) and then
connect to the camera using the
following URL http://camera_ip:portnumber.