OWNERS MANUAL HOIST FITNESS SYSTEMS CF-2168 Note: Both Serial Number and Model Number are Required when Ordering Parts RECORD SERIAL NUMBER HERE CATALOG NUMBER 0700-001 Customer Service (800) 548-5438 (619) 578-7676 Fax (619) 578-9558 R
A S S E M B LY I N S T R U C T I O N S CONTENTS INSTRUCTIONS (Step 1) ............................................................. 2 FRAME ASSEMBLY (Step 2) ........................................................ 4 PARTS LISTING ............................................................................ 13 HARDWARE LISTING .................................................................. 14 BOLT SIZING CHART .................................................................. 16 WASHER SIZING CHART .....
A S S E M B LY I N S T R U C T I O N S Step 1 INSTRUCTIONS Before beginning assembly please take the time to read the instructions thoroughly. Please use the catalog in this manual to make sure that all parts have been included in your shipment. When ordering use the part number and description from the catalog. Use only Hoist replacement parts when servicing. Failure to do so will void your warranty and could result in personal injury.
A S S E M B LY I N S T R U C T I O N S Page 3 HOIST FITNESS SYSTEMS R 2168 Assembly
A S S E M B LY I N S T R U C T I O N S Step 2 FRAME ASSEMBLY FACTORY INSTALLATION INSTRUCTION ONLY 1. PUT A DROP OF BLUE LOCTITE 242 ON BOLTS IF NECESSARY.
A S S E M B LY I N S T R U C T I O N S Step 2a FRAME ASSEMBLY In this step start by pressing (CA) into (4). Now slide (5) onto (4). Once (5) is in attach (4) to (2). Hand tighten bolts only, they will be tightened later. Part Descriptions 2 - Seated Assy. 4 - Adjuster Assy. 5 - 3/4” x 4 32/32” Shaft Page 5 Hardware Descriptions A - 3/8-16” x 1 1/4” Button Head Screw AA - 3/8” Internal Lock Washer AC - 3/8” Flat Washer CA - 3/4” I.D. X 1” O.D.
A S S E M B LY I N S T R U C T I O N S 4 CA CA A 5 AA AC 2 AC AA A 2168 Assembly HOIST FITNESS SYSTEMS R Page 6
A S S E M B LY I N S T R U C T I O N S Step 2b FRAME ASSEMBLY In this step start by pressing (CA) into (1). Next slide (9) into (4) from the top down until the locating boss snaps into the location as shown. Now slide (1) in (4) and screw (C) into (4) for secure. For the last step attach (6) as shown. Part Descriptions 1 - Chrome Assy. 4 - Adjuster Assy. 6 - Short Pull Pin 9 - EZ Glide Sleeve Page 7 Hardware Descriptions C - 3/8” x 3/4” Square Head Screw CA - 3/4” I.D. X 1” O.D.
A S S E M B LY I N S T R U C T I O N S CA 1 CA 9 6 C 4 2168 Assembly HOIST FITNESS SYSTEMS R Page 8
A S S E M B LY I N S T R U C T I O N S Step 2c FRAME ASSEMBLY In this step start by pressing (CA) into (3). Next slide (5) into (1) and (3) as shown. Now attach (3) to (1) and (2). Hand tighten bolts only, they will be tightened later . Part Descriptions 1 - Chrome Assy. 4 - Adjuster Assy. 6 - Short Pull Pin 9 - EZ Glide Sleeve Page 9 Hardware Descriptions C - 3/8” x 3/4” Square Head Screw CA - 3/4” I.D. X 1” O.D.
A S S E M B LY I N S T R U C T I O N S AC CA AA A 3 CA 5 A AA AC 5 1 AA AC A 2 AC A AA 2168 Assembly HOIST FITNESS SYSTEMS R Page 10
A S S E M B LY I N S T R U C T I O N S Step 2d FRAME ASSEMBLY In this step start by inserting (12) into (3). Next attach (7) to (10) and attach both (7) and (10) to (3). Now attach (8) to (11) and attach both (8) and (11) to (3). Wrench tighten bolts including all previously hand tightened bolts. Lift bench to position (13). Part Descriptions 3 -Back Seat Assy. 7 - Back Pad Assy. 8 - Seat Pad Assy.
A S S E M B LY I N S T R U C T I O N S 12 7 AD AB 3 B 10 8 11 12 AD AB AD B AB B AD 13 AB 13 B 13 2168 Assembly HOIST FITNESS SYSTEMS R Page 12
A S S E M B LY I N S T R U C T I O N S PART LISTING Key # Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 1 1 1 1 3 1 1 1 2 1 1 2 3 Page 13 Part Number Description 026-01X0319 026-01X0719 026-01X0720 026-01X0722 026-01M0427 026-01M0128 022-01PD0007 022-01PD0014 026-01PL125 026-01PL243 026-01PL253 026-01PL187RH 026-01PL195 Chrome Assy. Seated Assy. Back Seat Assy. Adjuster Assy. 3/4" Dia. x 4 31/32" Shaft Short Pull Pin Back Pad Assy. Seat Pad Assy.
A S S E M B LY I N S T R U C T I O N S HARDWARE Key # Qty. A B C LISTING Part Number Description 6 4 1 11-BTN-38114WZ 11-BTN-5163WZ 11-SET-3834SQFD 3/8-16" x 1 1/4" Button Head Screw 5/16-18" x 3" Button Head Screw 3/8" x 3/4" Squard Head Set Screw AA AB AC AD 6 4 6 4 13-LOK-38INT 13-LOK-516INT 13-FLT-38SAEWZ 13-FLT-516SAEWZ 3/8" Internal Lock Washer 5/16" Internal Lock Washer 3/8" Flat Washer 5/16" Flat Washer CA 6 014-0101003 3/4" I.D. x 1" O.D.
A S S E M B LY M A N U A L Page 15 HOIST FITNESS SYSTEMS R 2168 Assembly
A S S E M B LY M A N U A L BOLT SIZING CHART 2168 Assembly HOIST FITNESS SYSTEMS R Page 16
A S S E M B LY M A N U A L WASHER SIZING CHART LARGE, USS, 25mm SMALL, SAE, 26mm LARGE, USS, 34mm Page 17 HOIST FITNESS SYSTEMS R 2168 Assembly
A S S E M B LY M A N U A L WEIGHT TRAINING TIPS Always consult your physician before starting any exercise program. Hoist equipment is designed to maximize your time spent working out. Having an exercise routine planned out in advance will allow you to get the most benefit out of the time spent exercising, and will also enable you to work all the major muscle groups. Warm up properly before engaging in weight resistance training.
A S S E M B LY M A N U A L Page 19 HOIST FITNESS SYSTEMS R 2168 Assembly
A S S E M B LY M A N U A L Weight Training Exercise Log S=Sets R=Repetition per set W=Weight used FITNESS SYSTEMS 2168 Assembly Date Exercise S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W Totals Page 20 HOIST R
A S S E M B LY I N S T R U C T I O N S Page 21 HOIST FITNESS SYSTEMS R 2168 Assembly
OW N E R S M DECAL A N U A L P L AC E M E N T S Decal Descriptions 5 1 - 021-0003008 2 - 021-0003006 3 - 021-0012004 4 - 021-0004029 5 - 021-0004041 2 3 1 2168 Assembly 4 HOIST FITNESS SYSTEMS R Page 22
OW N E R S M DECAL A N U A L REFERENCE This decal has been attached to this piece of equipment to provide information regarding operation, safety and maintenance. Before use, take the time to read these decals.
OW N E R S R 1. READ AND UNDERSTAND ALL ENCLOSED INSTRUCTIONS before using this equipment. 2. INSPECT EQUIPMENT DAILY for loose, worn or frayed parts. Replace all parts at the first signs of wear. If in doubt about a certain part, DO NOT use the machine until the part is replaced. Failure to replace worn parts may result in injury. 3. DO NOT ATTEMPT to free any jammed part by yourself. Obtain assistance as the part may free itself suddenly causing possible injury.
A S S E M B LY I N S T R U C T I O N S Page 25 HOIST FITNESS SYSTEMS R 2168 Assembly
A S S E M B LY M A N U A L HOIST FITNESS SYSTEMS GENERAL MAINTENANCE INFORMATION Links, Pull-Pins, Snap Locks, Swivels, Weight Stack Pins: F Check all pieces for signs of visible wear or damage. F Check springs in snap hooks and pull-pins for proper tension and alignment. F If the spring sticks or has lost its rigidity, replace it immediately. Upholstery: F To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped down with a damp cloth after every workout.
A S S E M B LY M A N U A L Continued: GENERAL MAINTENANCE INFORMATION Belt and Cable Tension: F Referring to the Assembly/Owners Manual, when belts or cables are used check all bolts and attachments to be sure they are properly attached. F Check slack in belts or cables and readjust tension if needed. Seat Sleeves & Oilites: F Wipe down adjusting tubes with a dust free rag before applying lubricant. F Lubricate seat sleeves and oilites with a Silicon or Teflon based lubricant spray.
A S S E M B LY M A N U A L Hoist Fitness Systems LIMITED LIFETIME WARRANTY Hoist Fitness Systems warrants this product to the original purchaser to be free from defects in workmanship and/or materials under normal use or service. If at any time a component part is defective, Hoist Fitness Systems shall repair or replace it (at Hoist Fitness Systems option) within a reasonable period of time. This warranty does not cover costs of removal, transportation or reinstallation.