1. Prepare 8 bolt assemblies by first inserting a lock washer (#B) onto the bolt (#A) then a flat washer (#C) onto that same bolt (#A). 2. Carefully place the table top (#1) face down onto a protected surface. Then Align the table legs (#2) to the corner holes and insert 2 bolt assemblies into each corner. Secure using the Allen wrench (#D). TABLE ASSEMBLY COMPLETED Carefully turn the completed table upright. Make sure the table is rested on a flat surface and does not feel loose or wobbly.
2. Prepare 2 bolt assemblies 1. Place the chair by first inserting a lock back (#1) onto a washer (#D) onto the bolt protected surface. (#C) then a flat washer (#E) onto that same bolt (#C). 3. Align the cushion (#2) to the center holes on the chair back (#1), then insert the bolt assemblies into the center holes and secure using the Allen wrench (#F). 1. Prepare 4 bolt assemblies by first inserting a lock washer (#D) onto the bolt (#A) then a flat washer (#E) onto that same bolt (#A). 2.
1. Prepare 4 bolt assemblies by first inserting a lock washer (#D) onto the bolt (#B) then a flat washer (#E) onto that same bolt (#B). 2. Align the front legs (#3) to the front corners of the cushion (#2). Then insert 2 bolt assemblies into each corner and secure using the Allen wrench (#F). 1. Slide the stretchers (#4,5) between the legs. 2. Insert a screw (#G) at a diagonal into the holes at the end of each stretcher and secure using a Phillips screwdriver.