Owner Manual

1. Carefully place the coffee
table top (#1) face down
onto a protected surface.
2. Insert 2 wood dowels
(#D) into each corner.
4. Prepare 4 bolt assemblies by first
inserting a lock washer (#C) onto
the bolt (#A) then a flat washer
(#B) onto that same bolt (#A).
Insert one into each leg and secure.
3. Place the table legs (#3)
onto the other ends of
the wood dowels (#D).
Carefully turn the completed table upright. Make
sure the table is rested on a flat surface and does
not feel loose or wobbly. If it does, double check
that the bolts are secured and properly tightened.