Owner Manual

Carefully turn the completed table upright. Make sure the table is
rested on a flat surface and does not feel loose or wobbly. If it does,
double check that the bolts are secured and properly tightened.
ASSEMBLY IS COMPLETED
1. Carefully place the end
table top (#2) face down
onto a protected surface.
2. Insert 2 wood dowels
(#D) into each corner.
3. Place the end table legs (#4)
onto the other ends of the
wood dowels (#D).
4. Prepare 4 bolt assemblies by first
inserting a lock washer (#C) onto
the bolt (#A) then a flat washer
(#B) onto that same bolt (#A).
Insert one into each leg and secure.