ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST,CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES 1 When lock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger flat washer and the head of the screw or bolt. Position each part correctly and insert screws or bolts into their respective holes by hand tighten or using the proper hand tool.
I. Align the pre-drilled holes on the front legs (#2) to the pre-drilled holes on the seat (#1). II. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#C) onto the bolt (#B) and then the flat washer (#D) onto that SAME bolt (#B). Insert into the pre-drilled holes and secure using the Allen wrench (#E). I. Align the pre-drilled holes on the rear legs (#3) to the pre-drilled holes on the seat (#1). II.
Carefully turn the completed chair upright. Make sure the chair is rested on a flat surface and does not feel loose or wobbly. If it does, double check that the bolts are secured and properly tightened.