User Guide

-SINCE 1930-
HOLBY
TEMPERING VALVE
AN AUTOMATIC
ALL BRONZE
THERMOSTATICALLY OPERATED
WATER BLENDING DEVICE
APPROVED
by the
ANSI / AMERICAN SOCIETY
OF SANITARY ENGINEERING
STANDARD No. 1017
APPROVED
by the
BOARD OF STANDARDS AND APPEALS
CITY OF NEW YORK
CAL. #578 - 48 - SM
DISTRIBUTED BY
PLUMBING and HEATING SUPPLIERS
_____________________
Holby ValVe Inc.
24 Ferdon Street, newark, nJ 07105
U.S.a.
P
hone [phone]
F
ax [phone]
www.holby.com
ForM 14 1/12 - 1.5k
GUARANTY
We guarantee each new HOLBY TEMPERING VALVE to be free from defects in material and workmanship for a
period of one year from date of installation. Any HOLBY TEMPERING VALVE or part, returned to us carriage
prepaid, will be repaired or replaced without charge if found defective upon our examinations. All carriage charges to
be paid by the customer.
For this guarantee to be effective, installation must be properly made according to our piping recommendations. We
will not be responsible for any incidental damage or labor caused by defective material.
For proper installation of the HOLBY TEMPERING VALVE used in special applications, please obtain our piping
diagrams.
SIZE A B C D * E F G
SHIPPING
MIXED HOT COLD
WEIGHTS
OUTLET INLET INLET
1/2"
4-1/4" 8" 3-1/4" 6"
1/2" 1/2" 1/2"
7 lbs.
3/4"
4-1/4" 8" 3-1/4" 6"
3/4" 3/4" 3/4"
7 lbs.
1" 4-
1/4" 11-1/4" 4-1/4" 12" 1" 1" 1" 8 lbs.
1-
1/4" 4-3/4" 19" 4-1/2" 15" 1-1/4" 1-1/4" 1" 14 lbs.
1-
1/2" 5-1/2" 23" 5" 20" 1-1/2" 1-1/2" 1-1/4" 18 lbs.
2" 6
-3/8" 25" 6" 20" 2" 2" 1-1/2" 27 lbs.
2-
1/2" 7-1/2" 27-3/4" 6-1/2" 24" 2-1/2" 2-1/2" 2" 42 lbs.
3" 9" 29-
1/8" 7" 24" 3" 3" 2-1/2" 63 lbs.
4" 10
-1/4" 31" 8" 24" 4" 4" 4" 97 lbs.
* Note: "D" is clearance required for adjusting and servicing
STANDARD PIPE TAP