Other

C
e
n
t
e
r
l
I
n
e
C
e
n
t
e
r
l
I
n
e
Centerline (dotted)
#7b Wall Leans
“
#7a Wall Leans
“
“
or
#4b Treshold
Level
Drops
#3 Bottom
“
“
“
or
#4a Treshold
Level
Drops
Left Right
#1 Mark the
Centerline
of Unit
#8 Showerhead
Location
#7b Wall Leans
“
#7a Wall Leans
“
“
or
#4b Treshold
is Level
Drops
#4 Center Base
“
#2 Max Height
“
“
or
#4a Treshold
is Level
Drops
Left Right
#1 Mark the
Centerline
of Unit
#8 Showerhead
Location
Record your measurements by the numbers. Include unit information as well, concerning
model number, metal finish, glass type, etc.
Scan QR to download this measuring form
REV. 3/14/17
Document:
MM.3344
Follow these simple steps:
1 Mark Centerline of Unit on masking tape on with water based
marker
2 Determine and Mark the Max Height at the top of the unit
3 Measure the wall to joint distance for the Left Base of unit
4 Measure the joint to joint distance at Center Base of unit
5 Measure the joint to wall distance at Right Base of unit
6 (a-b) Determine if Threshold is Level or if it Drops from
side to side.
7 (a-b) Left Wall: Determine if there is a gap between the wall and level at the top or bottom of the enclosure
7 (c-d) Right Wall: Determine if there is a gap between the wall and level at the top or bottom of the enclosure
8. Is the showerhead on the left wall of unit or on right wall, or both. If rain shower, put note in Comments
“
or
#4b Treshold
Level
Drops
“
#6b Threshold
Drops
(or leave blank)
“
or
#4b Treshold
Level
Drops
“
#6a Threshold
Drops
(or leave blank)
#7b Wall Leans
“
#7c Wall Leans
“
(or leave blank)
#7b Wall Leans
“
#7a Wall Leans
“
(or leave blank)
#7b Wall Leans
“
#7b Wall Gap
“
(or leave blank)
Model Number:
Metal Finish:
Glass Type:
Handle or
Towel Bar Type:
Comments:
How to Measure a Neo Angle Stall
#3 Bottom
“
#3 Left Base
“
#3 Bottom
“
#5 Right Base
“
#7b Wall Leans
“
#7d Wall Gap
“
(or leave blank)
DRAFT