Lawn Mower User Manual

C 9.92

Operating Instructions

Maintenance after the first 50 service hours

172

Replacing the traction hydraulics pressure

filter

- Remove the air filter housing (1) with a 24mm wrench.

ATTENTION

Observe the instructions for handling fuel, flu-

ids and lubricants!

- Clean the mating surface of the filter mount.

- Withdraw the pressure filter from the housing.

- Clean the housing.

- Coat the new gasket with oil.

- Insert the new pressure filter in the air filter housing.

- Using a new gasket, screw the air filter housing in the

filter mount.

- Check for leaks.

- Check the hydraulic oil level.

Bild_S 990_047