Submittal Sheet

.97
FOR 3/4" PIPES, 2 PLACES.
FOR 1/2" PIPE, 4 PLACES.
R 1.25
2X 2.00
2X 3.00
2X 4.00
1.50
6X .19
3" Stainless Steel band
2.17
9.17
.87
1.75
ALL DIMENSIONS IN INCHES
393 ENTERPRISE STREET / SAN MARCOS, CA 92078 / 800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_118-T6_RevD
PRODUCT SPECIFICATION DRAWING
HOLDRITE® #118-T6
The HOLDRITE® #118-T6 is a Copper-Bonded™ bracket designed to support 1/2"
and 3/4" tubing. This bracket mounts directly onto a horizontal or vertical pipe. It
is designed to position water supplies for lavatories and other fixtures and is ideal
as a mid span support within a 2-1/2" or wider wall. Packaged with a self-locking
3" stainless steel band and self-adhesive isolation felt. When used for copper
tubing, solder directly to the bracket. Heat the tubing, not the bracket.
Product Information:
Material: 16 gage CRS, Copper-Bonded™ •
Load rating: 25 pounds •
UPC / IPC / IAPMO listed •