Submittal Sheet

2X 1.375
5.00
2X 2.50
(TOP VIEW)
90°
2X 1.8
9.68
2X 3°
(SIDE VIEW)
2.50
5.00
2.0
(TYPICAL APPLICATION END VIEW
AFTER INSTALLATION & PRIOR
TO TUBING PLACEMENT)
ALL DIMENSIONS IN INCHES
2560 PROGRESS STREET / VISTA, CA 92081 / 800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_125-D_RevB
PRODUCT SPECIFICATION DRAWING
HOLDRITE® HANGOVER™ #125-D
The HOLDRITE® HANGOVER™ concrete insert brackets are installed on
wood forms for use with cast-in-place concrete slabs. When the wood forms
are stripped away, the HOLDRITE® HANGOVER™ bracket's end tabs are bent
into position and are ready to support up to 1" CTS for horizontal pipe runs.
Product Information:
Material: 18 gage CRS, galvanized per ASTM-A653, G90 •
Load rating: 150 pound load rating in 3000 psi concrete, safety factor = 3 •
Complies with load requirements of MSS SP-58 •
Supports 1/2", 3/4" and 1" tubing with available inserts •