How to Guide

24" (Inside Wall)
4" (Inside Wall)
2X 25"
(Center to Center of Pipes)
2X 21.9"
(Center to Center of Pipes)
Scale 1:8
Scale 1:16
ALL DIMENSIONS IN INCHES
800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_30-SWHP-M_RevF
PRODUCT SPECIFICATION DRAWING
QUICK STAND™ #30-SWHP-M
Suspended Equipment Platform
Product Information:
Material: •
Pan: 18 gage CRS, galvanized
Hanger Support Sleeves: CRS, galvanized Pipe, 5/8" I.D. x 7/8" O.D x 4" Long
Drain Nipple: Schedule 40 galvanized steel with MIP threads, 1-1/4" I.D.
•
Wide platform allows water heaters up to 23-1/2" diameter •
Watertight welded corners and welded 1-1/4" I.D. steel drain body eliminate need for additional drain pan •
Static load rating 300 pounds with 2X safety factor (depending on structural anchorage) •
Galvanized steel construction •
Suspends with user supplied 3/8" or 1/2" threaded rod and hardware •
Four attachment points allows for seismic/sway bracing connection •
Patent pending •
THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT
TO CHANGE WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN
PART OR WHOLE WITHOUT WRITTEN AUTHORIZATION.
The #30-SWHP-M Suspended Equipment Platform is engineered to support water
heaters up to 20 U.S. gallons, or other equipment, up to 300 pounds total weight.
This time and labor savings tool is designed for the Professional Contractor. Design
features requested by plumbers are incorporated into a professional platform and
drain pan combination that can be suspended with 3/8" or 1/2" all thread rods. See
Installation Instructions for detail.