Specification

ITEM #1
ITEM #4
ITEM #2
ITEM #5
ITEM #3
30 "
ALL DIMENSIONS IN INCHES
16"
PRODUCT SPECIFICATION DRAWING
QUICKSTAND™ 30" X 30" (Water Heater & Equipment Support)
#40-S-30-A (assembled) and #40-S-30-U (unassembled)
The QUICKSTAND™ #40-S-30- (A or U) stand
safely elevates water heaters and other
equipment above the floor (1,200 lbs rating).
THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT TO CHANGE
WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN PART OR WHOLE WITHOUT
WRITTEN AUTHORIZATION.
800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_40-S-30_RevB
Product Information:
Material: •
Item #1: Top, 12 gage CRS, galvanized
Item #2: Leg, 16 gage CRS, galvanized, 4 places
Item #3: Safety Clip, 14 gage CRS, galvanized, 2 places
Item #4: SMS, Phillips Hex Head Washer, w/Serrated Under Head, #1/4-14 X 1/2"L, 16 places
Item #5: Lag Bolt, #1/4-10 X 2-1/2"L, self-drilling, 2 places
(items #3 and #5 included with product)
Engineered and lab tested to meet Uniform Plumbing Code (UPC) and •
International Plumbing Code (IPC) requirements, including elevation of
water heater's ignition source 18" above the floor
Holds up to 1,200 pounds capacity (up to 100 U.S. gallon tanks) •
QUICKSTAND™ weight 36 pounds without packaging •
Available in assembled and unassembled configurations •