How to Guide

21.34
(Inside Wall)
2.50
21.86
(Center to center of Rods)
PAN ASSY
1.32
DRAIN BODY ASSY
(PVC)
2.50
1.50
32.50
.50
Diagonal Braces (2)
FULLY ASSEMBLED
ALL DIMENSIONS IN INCHES
800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_40-SWHP_RevG
PRODUCT SPECIFICATION DRAWING
QUICK STAND™ #40-SWHP
Suspended Water Heater Platform
The Suspended Water Heater Platform is engineered to support water heaters up to
20 U.S. gallons (up to 375 pounds total weight). This time and labor savings tool is
designed for the Professional Contractor. Design features requested by plumbers are
incorporated into a professional platform that can be suspended with all thread rod.
See Installation Instructions for detail.
Product Information:
Material: •
Pan: 14 gage CRS, galvanized
Corner Brackets: 14 gage CRS, galvanized
Diagonal Braces: 16 gage CRS, galvanized
Wide platform allows water heaters up to 21-1/4" diameter •
Watertight corners and drain fittings eliminate need for additional drain pan •
Cross-braces (2) two included to capture water heater within the platform •
Static load rating 375 pounds with 2X safety factor (depending on structural anchorage) •
Includes PVC drain body 1" MIPT x 1" FS •
Galvanized steel construction •
Suspends with user supplied 3/8" or 1/2" threaded rod and hardware •
Four corner attachment points allows for seismic/sway bracing connection •
Patent pending •
THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT
TO CHANGE WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN
PART OR WHOLE WITHOUT WRITTEN AUTHORIZATION.