Product Overview

29.1
(Center to center of Rod)
28.50
(inside Wall)
3" (Inside Wall)
Pan Assy
Adapter Assy
1¼" PVC Adapter
Neoprene Washer
1¼" Conduit Locknut
42.83
2.50
.50
Diagonal Braces (2)
ALL DIMENSIONS IN INCHES
800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_60-SWHP_RevB
PRODUCT SPECIFICATION DRAWING
QUICK STAND™ #60-SWHP
Suspended Water Heater Platform
Product Information:
Material: •
Pan: 12 gage CRS, galvanized
Corner Brackets: 14 gage CRS, galvanized
Diagonal Braces: 16 gage CRS, galvanized
Wide platform allows water heaters up to 28-1/2" diameter •
Watertight corners and sealed 1¼" PVC drain fittings eliminate need for additional drain pan •
Cross-braces two (2) included to capture water heater within the platform •
Static load rating 750 pounds with 2X safety factor (depending on structural anchorage) •
Includes PVC drain body 1¼" MIPT x 1¼" FS •
Galvanized steel construction •
Suspends with user supplied 3/8" or 1/2" threaded rod and hardware •
Four corner attachment points allows for seismic/sway bracing connection •
Patent pending •
The #60-SWHP Suspended Water Heater Platform is engineered to support water
heaters up to 50 U.S. gallons, or other equipment, up to 750 pounds total weight.
This time and labor savings tool is designed for the Professional Contractor. Design
features requested by plumbers are incorporated into a professional platform and
drain pan combination that can be suspended with 3/8" or 1/2" all thread rods.
THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT
TO CHANGE WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN
PART OR WHOLE WITHOUT WRITTEN AUTHORIZATION.