How to Guide

See Dim "C"
(Telescoping)
See Dim "B"
See Dim "A"
7-3/4"
Non-Telescoping Version ("-B")
*
Safety Cap & Locator Whiskers Included
(Shown with optional CD Plate)
(OSHA Compliant Hole Cover)
Cap & Locator
Whiskers
CD Plate
(optional)
The HOLDRITE® Hydroflame Pro Series Sleeving System consists of UL & cUL listed assemblies that provide
sleeving & firestop solutions for cast-in-place concrete floors. These sleeve products provide solutions for both
metallic & non-metallic pipes, line-sets, cables, conduits, floor drains, tub drains, shower drains and toilet drains.
For slabs 2 ½" and thicker and for pipes, conduits & cables ½" - 6" nominal; 2 & 3 hour UL Fire Ratings and T, L &
W- ratings available. 50 Pa ratings available. See UL Fire Resistive Directory (R25101) for further details. Sleeves
are easly adapted for use on Corrugated Metal Decking with the use of HoldRite's CD Plates. 16 models include:
#HFP-P/M1 (B), #HFP-P/M2 (B), #HFP-P/M3 (B), #HFP-P/M4 (B) and #HFP-P/M6 (B).
Product Information:
Material: •
Main Sleeve Body & Safety Cap: Polypropylene
Mid-Body Seal: Thermal Plastic Rubber (TPR); Mold & Fungus resistant per ASTM G-21.
Locator Whiskers: Nylon
Fire Ring: 24GA CRS
Firestop Material: UL Listed Intumescent Composite
Patented & Patents Pending •
See Hydroflame Pro Series Installation Instructions, Best Practices documents and the lastest •
UL Fire Resistive Directory file (R25101) for details.
Note:
Height range: 2-1/2" to 12". •
Height range: 2-1/2" to 7-3/4" ("-B" version). •
Both standard & "-B" style can be extended by adding sleeving extension. •
Sleeves with black Bases & black Locator Whiskers are for use with •
metallic penetrants.
Sleeve with red Bases & red Locator Whiskers are for use with either •
metallic or non-metallic (plastic) penetrants.
The use of the Locator Whiskers is optional. •
*
*
800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_HFP Series, pg1 of 12_RevA
THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT
TO CHANGE WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN
PART OR WHOLE WITHOUT WRITTEN AUTHORIZATION.
PRODUCT SPECIFICATION DRAWING
Hydroflame Pro Series Sleeves