TRANSFORMING FIRESTOP SOLUTIONS PRODUCT CATALOG
TRANSFORMING FIRESTOP SOLUTIONS • TELESCOPING SLEEVES, YES! Eliminate the need to cut sleeves on the jobsite • LOCATOR WHISKERS, YES! Locate buried sleeves after concrete pour • FASTER INSTALL, YES! Up to 6 times faster to install than makeshift methods • EASY TO STOCK, YES! Available at a distributor near you • UL LISTED FIRESTOP DEVICE, YES! Meets and exceeds building code requirements • MADE IN THE USA, YES! Red, White, Blue & You 1 2 Lock outer sleeve in place SYSTEM COMPATIBLE 3 Nail to for
HOLDRITE® HYDROFLAME™ TRANSFORMING FIRESTOP SOLUTIONS
HOLDRITE® HydroFlame™ Pro Series Locator Whiskers 4 Engineered Solutions www.HOLDRITE.
TABLE OF CONTENTS COMPANY Transforming the Plumbing Industry Through Innovation .................................. 6 Converting Makeshift Methods into Engineered Solutions .................................7 Manufacturing in the USA ............................................................................................ 9 Transforming Firestop Solutions Through Industry Collaboration ...................13 FIRESTOP PRODUCTS HOLDRITE® HydroFlame™ PRO SERIES Why HOLDRITE® HydroFlame™ Pro Series? .........
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT SPECIFICATIONS & VIP SERVICES Since the introduction of the #101-18 copper bonded bracket over 34 years ago, HOLDRITE has been “Converting Makeshift Methods into Engineered Solutions.” The Hubbard family business was born in 1982 when Master Plumber George Hubbard designed a pipe support solution to replace the time-consuming and labor-intensive method of cutting blocks of wood to support water piping.
Ceiling/Floor Fire Stopping HOLDRITE® HydroFlame™ Custom Built Makeshift Method Engineered Solution Sink Sink Makeshift Method Engineered Solution DISTRIBUTION & SHIPPING Engineered Solution SPECIFICATIONS & VIP SERVICES Makeshift Method HYDROFLAME CUSTOM BUILT HOLDRITE® HydroFlame™ Pro Series HYDROFLAME PRO SERIES Ceiling/Floor Fire Stopping COMPANY CONVERTING MAKESHIFT METHODS INTO ENGINEERED SOLUTIONS APPENDIX FAX: 760-744-0507 1-800-321-0316 www.HOLDRITE.
FAX: 760-744-0507 1-800-321-0316 www.HOLDRITE.
MANUFACTURING IN THE USA RED, WHITE, BLUE & YOU! Since 1982, HOLDRITE® has been designing and manufacturing products in the USA. Our innovative patent protected products have enabled us to develop a national footprint. HOLDRITE®’s company locations are strategically placed in Tennessee, Nevada, and California in order to best serve our customers in North America.
HOLDRITE® HydroFlame™ Pro Series UL recognized water, smoke, and firestop system provides a water seal for unwanted water intrusion while still protecting against the spread of fire, smoke and gases. Also, available are water dam and water module accessories for added water-tight requirements. Commonly observed field devised methods may result in providing a dangerous pathway for water, smoke, gas or fire.
COMPANY HYDROFLAME PRO SERIES SAFEGUARD PROPERTY FROM WATER DAMAGE AND MOLD DISTRIBUTION & SHIPPING Many buildings are designed to house data communication networks and computer equipment. Such hi-tech investments are critical to corporations, healthcare facilities, military installations, government infrastructure and universities. HOLDRITE® HydroFlame™ Pro Series protects these high dollar assets from unwanted destruction due to water, as well as fire and smoke.
Contractor HYDROFLAME PRO SERIES COMPANY TRANSFORMING FIRESTOP SOLUTIONS HOLDRITE® HYDROFLAME™ PRO SERIES Interlocking Telescoping Sleeve Design HYDROFLAME CUSTOM BUILT • • • • • • • • • • Locator Whiskers • Easily locate buried sleeves after concrete pour • Quickly identify plastic pipe (red whiskers) or metal pipe (black whiskers) sleeve penetrations Safety Cap • Threaded cap allows for easy, non-destructive removal • Meets OSHA hole cover requirements • Safety cap attaches directly to telescopi
• • • • • • • • • Engineer/Architect Owner/Developer/General Contractor 1-800-321-0316 www.HOLDRITE.
TRANSFORMING FIRESTOP S O LU T I O N S W I T H T H E EASY TO STOCK HOLDRITE® HYDROFLAME™ PRO SERIES The evolution of a lab-tested and UL Listed cast-inplace firestop solution continues with the introduction of the HOLDRITE HydroFlame Pro Series. Finally, an easy to specify, stock, order, and install firestop solution is available on wholesale distributors’ shelves throughout North America.
Locator Whiskers Easily locate buried sleeves after concrete pour (Red, Black or Green) Safety Cap Eliminate the need to cut sleeves on the jobsite Threaded cap allows for easy non-destructive removal Outer Sleeve Telescope sleeve allows range of height 2 1/2” to 12” Inner Sleeve Seal design ideally grips pipe with up to 10X greater contact with pipe than other manufactured sleeve devices - UL W-Rated Interlocking Nail-In Base - Allows for off-center pipes Ideal for layout alignment or tight locatio
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT SPECIFICATIONS & VIP SERVICES TRANSFORMING FIRESTOP SOLUTIONS TELESCOPING SLEEVES, YES! • Eliminate the need to cut sleeves on most jobsites LOCATOR WHISKERS, YES! • Locate buried sleeves after concrete pour SAFETY CAP, YES! • OSHA compliant hole cover • Helps keep jobsite and installers safe FOR WOOD OR METAL FORM DECKS, YES! • Telescoping or non-telescoping design FIRESTOP A WIDE VARIETY OF PIPE TYPE & SIZES, YES! • Material type and pipe sizes easily
Eliminate the need to cut sleeves on the jobsite Adjust sleeve to desired height 2 ½” to 12” Extension sleeves available for greater than 12” Accommodates various pipe, conduit and cable types and sizes ½” to 6” Non-telescoping design also available at 7 3/4” tall Faster install over traditional methods or other manufactured designs Measurement guide system built into sleeves (US and Metric) Significantly reduces the number of SKU’s required to stock shelves or complete job • Easily locate buried sleeves a
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT SPECIFICATIONS & VIP SERVICES DISTRIBUTION & SHIPPING APPENDIX 18 REDUCE INSTALLATION COSTS WITH THE HOLDRITE® HYDROFLAME™ PRO SERIES Application Cost Savings Analysis Example Install sleeve and firestop for a 2” pipe through an 8” thick concrete slab on a wood form deck. Problematic Plastic Concrete Sleeve Makeshift Method Installation Steps 1. Select 4” sleeve, measure and mark for saw cutting 2.
HOLDRITE® HYDROFLAME™ PRO SERIES FIRESTOP SLEEVE ADVANTAGES VS.
TRANSFORMING FIRESTOP SOLUTIONS 20 Engineered Solutions www.HOLDRITE.
Corrugated Metal Deck Plates Page 26 Sleeve Extensions Page 27 Water Modules Page 28 Water Dams Page 29 Tub Boxes Page 30 Aerator Adapters Page 31 Plastic Shower Drain Sleeves Cast Iron Drain Sleeves Cable and Line Set Sleeves Page 34 Closet Flange Sleeves VIP No Charge Services Page 57 Index Page 63-65 Page 35 1-800-321-0316 Page 32 Safety Cap Tool Page 35 (Drain Not Included) Page 33 Specifications Page 51 APPENDIX FAX: 760-744-0507 (Flange Not Included) (Drain Not Included) DISTRIB
COMPANY HOLDRITE® HYDROFLAME™ PRO SERIES TELESCOPING FIRESTOP SLEEVES Type UL Rating Water W Smoke / Gas L DISTRIBUTION & SHIPPING APPENDIX 22 Fire F Thermal T* Status *T-Rating when penetrant is non-metallic SPECIFICATIONS & VIP SERVICES HYDROFLAME CUSTOM BUILT HYDROFLAME PRO SERIES • • • • • • • • • • • • • • • • • • • • • Ideal for flat concrete form decks – cast-in-place Ideal for corrugated metal decks (corrugated deck plate required) Available for ½” to 6” penetrants – piping, cond
UL Rating Water W Smoke / Gas L Fire F Thermal T* Status *T-Rating when penetrant is non-metallic Penetrating Pipe Type Nominal Penetrant Size Box Qty HFP-P1B Plastic and Metal 1/2” - 1” 10 HFP-P2B Plastic and Metal 1-1/4” - 2” 10 HFP-P3B Plastic and Metal 2” - 3” 10 HFP-P4B Plastic and Metal 3” - 4” 10 HFP-P6B Plastic and Metal 5” - 6” 2 HFP-M1B Metal 1/2” - 1” 10 HFP-M2B Metal 1-1/4” - 2” 10 HFP-M3B Metal 2” - 3” 10 HFP-M4B Metal 3” - 4” 10 HFP-M6B Metal
COMPANY HOLDRITE® HYDROFLAME™ PRO SERIES TELESCOPING HOLLOW SLEEVES APPENDIX DISTRIBUTION & SHIPPING SPECIFICATIONS & VIP SERVICES HYDROFLAME CUSTOM BUILT HYDROFLAME PRO SERIES (SLEEVE ONLY, FIRESTOPPING BY OTHERS) 24 Type UL Rating Water W* Smoke / Gas L Fire F Thermal T* Status *T-Rating when penetrant is non-metallic *W-Rated when used with silicone sealant • UL Listed sleeves, when installed per UL Systems • Firestopping provided by others (no intumescent material included), can ach
(SLEEVE ONLY, FIRESTOPPING BY OTHERS) W* Smoke / Gas L Fire F Thermal T* Status *T-Rating when penetrant is non-metallic *W-Rated when used with silicone sealant Penetrating Pipe Type Nominal Penetrant Size Box Qty HFP-H2B Plastic and Metal 1/4” - 1 1/4” 10 HFP-H3B Plastic and Metal 1” - 2” 10 HFP-H4B Plastic and Metal 1-1/4” - 3” 10 HFP-H5B Metal 2-1/2”- 4” 10 HFP-H7B Metal 4” - 6” 2 SPECIFICATIONS & VIP SERVICES Model Number Suffix “-S”added to model number provideds a m
COMPANY HOLDRITE® HYDROFLAME™ PRO SERIES CORRUGATED METAL DECK PLATES HYDROFLAME PRO SERIES • For use with concrete pours over corrugated metal decks • Assembles directly to HOLDRITE HydroFlame Pro Series Firestop Sleeves • Sizes available for 1”, 2”, 3”, 4”, and 6” sleeves • Superior strength and stability • One-piece metal deck solution DISTRIBUTION & SHIPPING SPECIFICATIONS & VIP SERVICES HYDROFLAME CUSTOM BUILT (*Must be ordered with HydroFlame Pro Series Sleeves) Model Number Penetrating Pipe
4 3/4” Fits Firestop Sleeves Fits Hollow Sleeves Nominal Penetrant Size Box Qty HFPE1 #1 Firestop Sleeves #2 Hollow Sleeves 1/4” - 1-1/4” 5 HFPE2 #2 Firestop Sleeves #3 Hollow Sleeves 1” - 2” 10 HFPE3 #3 Firestop Sleeves #4 Hollow Sleeves 1-1/4” - 3” 10 HFPE4 #4 Firestop Sleeves #5 Hollow Sleeves 2 1/2”- 4” 10 HFPE6 #6 Firestop Sleeves #7 Hollow Sleeves 4” - 6” 2 HYDROFLAME CUSTOM BUILT Model Number HYDROFLAME PRO SERIES • Extends the height of HOLDRITE HydroFlame Pro Series
COMPANY HOLDRITE® HYDROFLAME™ PRO SERIES WATER MODULE HYDROFLAME CUSTOM BUILT HYDROFLAME PRO SERIES • Provides added water protection for HOLDRITE HydroFlame Pro Series Sleeves • Prevents debris from falling into annular space around piping • Pre-installed prior to concrete pour • Available for all HOLDRITE HydroFlame Pro Series Sleeve sizes • Adds 1/2” to the overall height of pro series sleeves • Accepts safety cap and other HOLDRITE HydroFlame Pro Series accessories • UL W-Rated seal, water-tight for
Fits Firestop Sleeves Fits Hollow Sleeves Nominal Penetrant Size Box Qty HFPWD1 #1 Firestop Sleeves #2 Hollow Sleeves 1/4” - 1-1/4” 5 HFPWD2 #2 Firestop Sleeves #3 Hollow Sleeves 1” - 2” 5 HFPWD3 #3 Firestop Sleeves #4 Hollow Sleeves 1-1/4” - 3” 5 HFPWD4 #4 Firestop Sleeves #5 Hollow Sleeves 2 1/2”- 4” 5 HFPWD6 #6 Firestop Sleeves #7 Hollow Sleeves 4” - 6” 5 2 Remove cap with Safety Cap Tool or break out with hammer SPECIFICATIONS & VIP SERVICES 1 3 Install 2” Water Dam, ad
COMPANY HOLDRITE® HYDROFLAME™ PRO SERIES TUB BOXES HYDROFLAME PRO SERIES • • • • • HFPTB-1.5NP Model Number Penetrating Pipe Type Nominal Penetrant Size Box Qty HFPTB-TW-0200 1-1/2” Thin Wall Drain 1-1/2” O.D. 5 HFPTB-NP-0200 1-1/2” Nominal Pipe Size Drain 1-1/2” IPS 5 HFPTB-1.
HYDROFLAME PRO SERIES • Provides a recess in the underside of the concrete floor, for fitting access • Available for use with 2”, 3”, 4” & 6” HOLDRITE HydroFlame Pro Series Sleeve • For use in concrete floors as thin as 5-1/2” • Ideal for Sovent and other high and tight fitting joint access COMPANY HOLDRITE® HYDROFLAME™ PRO SERIES AERATOR ADAPTER HFPA6 Fits Firestop Sleeves Fits Hollow Sleeves Nominal Penetrant Size Height Box Qty Prox.
COMPANY HOLDRITE® HYDROFLAME™ PRO SERIES SHOWER DRAIN SLEEVE APPENDIX DISTRIBUTION & SHIPPING SPECIFICATIONS & VIP SERVICES HYDROFLAME CUSTOM BUILT HYDROFLAME PRO SERIES • • • • • • 32 UL Listed firestop device – 3 hour F-Rating For 2” shower/floor drains (Drain Not Included) Allows for a recessed drain body in shower pans and shower stalls Accepts plastic drain piping Adjustable height sleeve – up to 14 ¾” slab height Extensions available Type UL Rating Water W Smoke /Gas L Fire F Status
Type UL Rating Fire F Penetrating Pipe Type Status Nominal Penetrant Size Box Qty HFP-2CI-DRN Hubless Cast Iron 2” 10 HFP-23CI-DRN Hubless Cast Iron 2” - 3” 10 HFP-34CI-DRN Hubless Cast Iron 3” - 4” 10 HFP-6CI-DRN Hubless Cast Iron 6” 2 2 Adjust sleeve to desired height 3 4 Set drain on top of sleeve Secure sleeve to form deck (shown with extension) Pour concrete HOLDRITE® HYDROFLAME™ CUSTOM BUILT FLOOR DRAIN KIT Mid-body seal provides water-tight penetration UL Listed firesto
COMPANY HOLDRITE® HYDROFLAME™ PRO SERIES CABLE & LINE-SET SLEEVES Type UL Rating Water W* Smoke /Gas L Fire F Thermal T* Status *T-Rating when penetrant is non-metallic *W-Rated when used with silicone sealant Model Number Penetrating Pipe Type Nominal Penetrant Size Box Qty HFP-CSM2 Cables 45% fill max 10 HFP-CSM3 Cables 45% fill max 10 HFP-CSM2B Cables 45% fill max 10 HFP-CSM3B Cables 45% fill max 10 HFP-LSP3 Line-sets and multiple pipes Various, including insulation 1
UL Listed firestop device – 3 hour F-Rating Models for 3” or 4” toilet flanges (Flanges Not Included) For both plastic and no-hub cast iron drain piping Mid-body seal provides water-tight penetration Adjustable height sleeve up to 12” Extensions are available for slabs over 12” Type UL Rating Water W Smoke /Gas L Fire F Thermal T* Status *T-Rating when penetrant is non-metallic Model Number Penetrating Pipe Type Nominal Penetrant Size Box Qty HFP-CF3PL Plastic or Cast Iron 3” 10 HFP-CF4P
HOLDRITE® HYDROFLAME™ CUSTOM BUILT FIRESTOP SOLUTIONS – SET IT AND FORGET IT! HydroFlame Custom Built Firestop Solutions meet and exceed building code requirements and provide an engineered technology that is UL Listed to deliver the ultimate cast-in-place water, smoke, and firestop performance. From our Nashville, Tennessee manufacturing facility we are able to manufacture and ship custom sleeves for your building project.
Safety Cap Meets OSHA loading requirements for hole covers CUSTOM BUILT Patented Mid-Body Seal Internal and external waterproofing - UL W-Rated DISTRIBUTION & SHIPPING Intumescent Wrap Strip Built-in firestop 1-800-321-0316 www.HOLDRITE.
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT SPECIFICATIONS & VIP SERVICES HOLDRITE® HydroFlame™ Custom Built is also easy to order. Provide the following key information: 1. What is the penetrating pipe size? 1 2. What is the piping material - PVC, Copper, Cast Iron, Steel, etc? 3. What is the depth of the slab? You're done! 2 3 Easy installation APPENDIX DISTRIBUTION & SHIPPING HOLDRITE® HYDROFLAME™ CUSTOM BUILT SET IT AND FORGET IT 38 Engineered Solutions www.HOLDRITE.
Shower Drain Sleeves Floor Drain Kit Page 44 Page 32, 45 Page 33, 45 Cable and Line Set Sleeves Page 45 Corrugated Deck Optional Pipe Size Concrete Sleeves Page 46 Corrugated Deck Concrete Sleeves (Sleeve Only-No Water Seal) Page 46 Flat Form Deck Optional Pipe Size Sleeves Page 47 Wood Deck Concrete Sleeves (Sleeve Only, No Water Seal) Page 47 Slab & Wall Seal Sleeves Page 48, 49 Specifications Page 51 VIP No Charge Services Page 57 Index Page 66-72 (Flange Not Included) FAX: 760-744-0507 (
APPENDIX DISTRIBUTION & SHIPPING SPECIFICATIONS & VIP SERVICES HYDROFLAME CUSTOM BUILT HYDROFLAME PRO SERIES COMPANY HOLDRITE® HYDROFLAME™ CUSTOM BUILT FLAT FORM DECK SLEEVES 40 CUSTOM BUILT • • • • • • • • • Mid-body seal provides watertight penetration – UL W-Rated UL Listed firestop device (2 or 3-hour F-ratings) Built-in water, fire, smoke and gas protection Custom cut to your specified height at no extra cost Turn-key installation - no job site modifications required Includes OSHA compliant s
Model # Penetrating Pipe Type(s) COMPANY HOLDRITE® HYDROFLAME™ CUSTOM BUILT FLAT FORM DECK SLEEVES Pipe O.D. Nominal Penetrant Size 2.38” 2” Cast Iron - Extra Heavy 3.50” 3” PS-CH-0400 Cast Iron - Extra Heavy 4.50” 4” PS-CI-0150 Cast Iron - Service Weight 1.90” 1½” PS-CI-0200 Cast Iron - Service Weight 2.30” 2” PS-CI-0300 Cast Iron - Service Weight 3.30” 3” PS-CI-0400 Cast Iron - Service Weight 4.30” 4” PS-CI-0600 Cast Iron - Service Weight 6.
APPENDIX DISTRIBUTION & SHIPPING SPECIFICATIONS & VIP SERVICES HYDROFLAME CUSTOM BUILT HYDROFLAME PRO SERIES COMPANY HOLDRITE® HYDROFLAME™ CUSTOM BUILT CORRUGATED METAL FORM DECK SLEEVES 42 CUSTOM BUILT • Mid-body seal provides watertight penetration – UL W-Rated • UL Listed firestop device • One-piece construction - no parts, pieces or field modifications necessary • Built-in water, fire, smoke and gas protection • Custom cut to your specified height at no extra cost • Includes OSHA compliant safe
COMPANY HOLDRITE® HYDROFLAME™ CUSTOM BUILT CORRUGATED METAL FORM DECK SLEEVES Penetrating Pipe Type(s) Pipe O.D. Nominal Penetrant Size CD-CH-0200 Cast Iron - Extra Heavy 2.38” 2” CD-CH-0300 Cast Iron - Extra Heavy 3.50” 3” CD-CH-0400 Cast Iron - Extra Heavy 4.50” 4” CD-CI-0150 Cast Iron - Service Weight 1.90” 1½” CD-CI-0200 Cast Iron - Service Weight 2.30” 2” CD-CI-0300 Cast Iron - Service Weight 3.30” 3” Cast Iron - Service Weight 4.30” 4” Cast Iron - Service Weight 6.
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT SPECIFICATIONS & VIP SERVICES DISTRIBUTION & SHIPPING APPENDIX 44 HOLDRITE® HYDROFLAME™ CUSTOM BUILT AERATOR ADAPTER BOX • • • • • Provides a recess in under side of slab for fitting access Accepts 3”, 4” and 6” HydroFlame sleeves 3½” tall box For 8” or thicker concrete floors Ideal for Sovent® and other high and tight fitting joint access Model # Pipe Type(s) Nominal Penetrant Size AA-0304 PVC, ABS, No-Hub Cast Iron 3” or 4” AA-06 PVC, ABS, N
UL Listed firestop device Built-in fire protection Provides a fast and strong drain support For use with 2” PVC drains (drain body and riser pipe not included) Glue 2” PVC pipe into bottom of sleeve base Model # Pipe Type(s) Pipe O.D. Nominal Pipe Size PS-SD-0200 PVC, ccPVC & ABS 2.375” 2” • • • • Penetrating Pipe Type(s) Pipe O.D.
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT SPECIFICATIONS & VIP SERVICES DISTRIBUTION & SHIPPING APPENDIX 46 HOLDRITE® HYDROFLAME™ CUSTOM BUILT CORRUGATED DECK OPTIONAL PIPE SIZE CONCRETE SLEEVES • • • • CUSTOM BUILT • • • • UL Listed firestop device Built-in fire protection Custom cut to your specified height at no extra cost Each sleeve accepts a range of pipe sizes between ½” and 6”: ½”-1”, 1¼”-2”, 2½”-3”, 3”-4” or 5”-6” Includes OSHA compliant safety cap/hole cover Allows for movement an
CUSTOM BUILT UL Listed firestop device Interior mid-body seal provides water resistant penetration Built-in fire protection Custom cut to your specified height at no extra cost Each sleeve accepts a range of pipe sizes between ½” and 6”: ½”-1”, 1¼”-2”, 2½”-3”, 3”-4” or 5”-6” • Includes OSHA compliant safety cap/hole cover • Allows for movement and off-center piping • Reduced time to dry floors and finish building Penetrating Pipe Type(s) Pipe O.D.
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT SPECIFICATIONS & VIP SERVICES DISTRIBUTION & SHIPPING APPENDIX 48 HOLDRITE® HYDROFLAME™ CUSTOM BUILT SLAB AND WALL SEAL SLEEVES CUSTOM BUILT • Mid-body seal provides watertight penetration • Watertight seal helps protect property against water intrusion, mold, insects/termites, methane and radon gas • Allows for expansion, contraction and movement • Available for ½”-6” pipes and conduits • Custom cut to your specified length (specify length when orde
HP-CH-0200 Cast Iron - Extra Heavy 2.38” 2” HP-CH-0300 Cast Iron - Extra Heavy 3.50” 3” HP-CH-0400 Cast Iron - Extra Heavy 4.50” 4” HP-CI-0150 Cast Iron - Service Weight 1.90” 1½” HP-CI-0200 Cast Iron - Service Weight 2.30” 2” HP-CI-0300 Cast Iron - Service Weight 3.30” 3” HP-CI-0400 Cast Iron - Service Weight 4.30” 4” HP-CI-0600 Cast Iron - Service Weight 6.30” 6” HP-CX-0150 Cast Iron - Hubless 1.90” 1½” HP-CX-0200 Cast Iron - Hubless 2.
Engineered Solutions www.HOLDRITE.
COMPANY HYDROFLAME PRO SERIES SPECIFICATIONS & VIP SERVICES DISTRIBUTION & SHIPPING APPENDIX 51 Engineered Solutions www.HOLDRITE.
1 APPENDIX DISTRIBUTION & SHIPPING SPECIFICATIONS & VIP SERVICES HYDROFLAME CUSTOM BUILT HYDROFLAME PRO SERIES COMPANY HOLDRITE® HYDROFLAME™ PRO SERIES INSTALLATION DETAILS PAGE 52 3 2 STANDARD CONCRETE DECK SLEEVE STANDARD CONCRETE DECK SLEEVE CAST-IN-PLACE SLEEVE CAST-IN-PLACE SLEEVE FOR INSULATED PIPES SHOWN WITH HOLDRITE HYDROFLAME PRO SERIES CAST-IN-PLACE FIRESTOP SLEEVE. THIS SLEEVE CAN BE USED FOR A WIDE VARIETY OF PIPE MATERIALS UP TO 6" DIAMETER, DEPENDING ON PIPE TYPE.
COMPANY 5 4 CAST-IN-PLACE SLEEVE CAST-IN-PLACE SLEEVE THE HOLDRITE® HYDROFLAME™ PRO SERIES CAST-IN-PLACE SLEEVE ATTACHES TO A WOOD FORM DECK AND PROVIDES A PATHWAY THROUGH A CONCRETE SLAB FOR PIPE,CONDUIT & CABLING.OSHA COMPLIANT SAFETY CAP INCLUDED.SEE UL FIRE RESISTANCE DIRECTORY FOR DETAILS. FOR 1/2"-6" PIPING. (FIRESTOP BY OTHERS) THE HOLDRITE HYDROFLAME PRO SERIES CAST-IN-PLACE SLEEVE PROVIDES A UL LISTED FIRESTOP SOLUTION FOR 3" OR 4" DRAIN PIPE. CLOSET FLANGE NOT INCLUDED.
COMPANY APPENDIX DISTRIBUTION & SHIPPING SPECIFICATIONS & VIP SERVICES HYDROFLAME CUSTOM BUILT HYDROFLAME PRO SERIES HOLDRITE® HYDROFLAME™ CUSTOM BUILT INSTALLATION DETAILS PAGE 54 Engineered Solutions www.HOLDRITE.
COMPANY HYDROFLAME CUSTOM BUILT Visit www.holdrite.com for individual application drawings. HYDROFLAME PRO SERIES Customized installation detail pages can be created upon request. SPECIFICATIONS & VIP SERVICES DISTRIBUTION & SHIPPING Your company name and/or logo APPENDIX FAX: 760-744-0507 1-800-321-0316 www.HOLDRITE.
COMPANY Do your specifications include HOLDRITE products and innovations? Let us update them at NO COST to you. HOLDRITE’s specification sales team will review your existing plumbing specifications and update them to reflect HOLDRITE products where applicable. Simply email your plumbing specifications to specrpm@holdrite.com and we will highlight any changes or revisions made and return them at NO COST to you.
COMPANY • • • • • • • NO COST material take-offs for your projects Electronically transfer your construction plans and documents Ten day turn around on VIP Proposals Completed by Estimators with over 20 years of plumbing experience Ideal for establishing shop standards and project pre-planning for J.I.T. deliveries 3-D product drawings available in 5 formats Visit www.holdrite.
COMPANY HYDROFLAME PRO SERIES HYDROFLAME DECK HOLE PENETRATION CALCULATOR CORRUGATED SLEEVE | Deck Hole Cutout CENTER TO CENTER CALCULATOR DISTRIBUTION & SHIPPING APPENDIX 58 PIPE SIZE “CUSTOM BUILT” HOLE CUT SIZE “PRO SERIES” HOLE CUT SIZE 1/2” 3 3/16” 2 3/4” 3/4” 3 7/16” 2 3/4” 1” 3 11/16” 2 3/4” 1 1/4” 4” 4” 1 1/2” 4 1/4” 4” 2” 4 3/4” 4” 2 1/2” 5 1/4” 5” 3” 5 7/8” 5” 4” 6 7/8” 6” 6” 9 7/8” 8 1/4” Use our online calculator: http://holdrite.
DISTRIBUTION & SHIPPING FAX: 760-744-0507 1-800-321-0316 www.HOLDRITE.
COMPANY HYDROFLAME PRO SERIES HOLDRITE DISTRIBUTION & SHIPPING West Coast Distribution Center Las Vegas, NV Executive Offices 14284 Danielson Street | Poway, CA 92064 Toll Free: 1-800-321-0316 Main: 1-760-744-6944 | Fax: 1-760-744-0507 Operations & East Coast Distribution Center 1001 Centre Pointe Drive, Suite B La Vergne, TN 37086 APPENDIX DISTRIBUTION & SHIPPING SPECIFICATIONS & VIP SERVICES HYDROFLAME CUSTOM BUILT = West Coast Distribution 60 = East Coast Distribution DISTRIBUTION AND SHIPPING
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT converting makeshift methods into engineered solutions CONTACT US Need samples, additional product data or a price quote? Reach out to us by phone, fax or email. Our dedicated Customer Support Team is ready to help. We look forward to working with you. Toll-Free: 800-321-0316 | Phone: 760-744-6944 | Fax: 760-744-0507 www.HOLDRITE.com | sales@holdrite.
FAX: 760-744-0507 1-800-321-0316 www.HOLDRITE.
APPENDIX HOLDRITE® HYDROFLAME™ PRO SERIES HOLDRITE® HYDROFLAME™ CUSTOM BUILT FAX: 760-744-0507 1-800-321-0316 www.HOLDRITE.
COMPANY PRO SERIES APPENDIX DISTRIBUTION & SHIPPING SPECIFICATIONS & VIP SERVICES HYDROFLAME CUSTOM BUILT HYDROFLAME PRO SERIES Model # 64 Product Description Penetrant Pipe Size Page(s) HFP-P1 Holdrite HydroFlame Pro Series Telescoping Firestop Sleeves (8”-12”) 1/2” - 1” 22 HFP-P2 Holdrite HydroFlame Pro Series Telescoping Firestop Sleeves (8”-12”) 1-1/4” - 2” 22 HFP-P3 Holdrite HydroFlame Pro Series Telescoping Firestop Sleeves (8”-12”) 2” - 3” 22 HFP-P4 Holdrite HydroFlame Pro Se
COMPANY PRO SERIES Product Description Penetrant Pipe Size Page(s) HFPWM4 Holdrite HydroFlame Pro Series Water Modules 3” - 4” 28 HFPWM6 Holdrite HydroFlame Pro Series Water Modules 5” - 6” 28 HFPWD1 Holdrite HydroFlame Pro Series Water Dams 1/2” - 1” 29 HFPWD2 Holdrite HydroFlame Pro Series Water Dams 1-1/4” - 2” 29 HFPWD3 Holdrite HydroFlame Pro Series Water Dams 2” - 3” 29 HFPWD4 Holdrite HydroFlame Pro Series Water Dams 3” - 4” 29 Holdrite HydroFlame Pro Series Water Dams 5”
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT SPECIFICATIONS & VIP SERVICES DISTRIBUTION & SHIPPING APPENDIX 66 ® ™ CUSTOM BUILT Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) PS-NP-0050 HydroFlame Cast-in-Place Sleeves .840” ½” 40 PS-NP-0075 HydroFlame Cast-in-Place Sleeves 1.050” ¾” 40 40 PS-NP-0100 HydroFlame Cast-in-Place Sleeves 1.315” 1” PS-NP-0125 HydroFlame Cast-in-Place Sleeves 1.660” 1¼” 40 PS-NP-0150 HydroFlame Cast-in-Place Sleeves 1.
™ Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) PS-CI-0300 HydroFlame Cast-in-Place Sleeves 3.30” 3” 41 PS-CI-0400 HydroFlame Cast-in-Place Sleeves 4.30” 4” 41 41 PS-CI-0600 HydroFlame Cast-in-Place Sleeves 6.30” 6” PS-CX-0150 HydroFlame Cast-in-Place Sleeves 1.90” 1½” 41 PS-CX-0200 HydroFlame Cast-in-Place Sleeves 2.35” 2” 41 PS-CX-0300 HydroFlame Cast-in-Place Sleeves 3.35” 3” 41 41 HydroFlame Cast-in-Place Sleeves 4.
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT SPECIFICATIONS & VIP SERVICES DISTRIBUTION & SHIPPING APPENDIX 68 ® ™ CUSTOM BUILT Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) CD-CP-0150 Corrugated Cast-in-Place Sleeves 1.625” 1½” 42 CD-CP-0200 Corrugated Cast-in-Place Sleeves 2.125” 2” 42 42 CD-CN-0050 Corrugated Cast-in-Place Sleeves .840” ½” CD-CN-0075 Corrugated Cast-in-Place Sleeves 1.050” ¾” 42 CD-CN-0100 Corrugated Cast-in-Place Sleeves 1.
™ Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) CD-ST-0200 Corrugated Cast-in-Place Sleeves 2.375” 2” 43 CD-ST-0250 Corrugated Cast-in-Place Sleeves 2.875” 2½” 43 43 CD-ST-0300 Corrugated Cast-in-Place Sleeves 3.50” 3” CD-ST-0400 Corrugated Cast-in-Place Sleeves 4.5” 4” 43 CD-ST-0600 Corrugated Cast-in-Place Sleeves 6.625” 6” 43 CD-ET-0050 Corrugated Cast-in-Place Sleeves 0.706” ½” 43 43 Corrugated Cast-in-Place Sleeves 0.
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT SPECIFICATIONS & VIP SERVICES DISTRIBUTION & SHIPPING APPENDIX 70 ® ™ CUSTOM BUILT Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) HP-CT-0100 Slab and Wall Seal w/ Pipe Inserts 1.125” 1” 48 HP-CT-0125 Slab and Wall Seal w/ Pipe Inserts 1.375” 1¼” 48 48 HP-CT-0150 Slab and Wall Seal w/ Pipe Inserts 1.625” 1½” HP-CT-0200 Slab and Wall Seal w/ Pipe Inserts 2.
™ Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) TB-NP-0200 Cast-in-Place Tub Box N/A 1½” 44 TB-TW-0200 Cast-in-Place Tub Box N/A 1½” 44 44 AA-0304 Aerator Adapter Box for Wood Form Deck N/A 3” or 4” AA-06 Aerator Adapter Box for Wood Form Deck N/A 6” 44 PS-NPCF-0300 Cast-in-Place Closet Flange Sleeves 3.5” 3” 44 PS-NPCF-0400 Cast-in-Place Closet Flange Sleeves 4.5” 4” 44 44 Cast-in-Place Closet Flange Sleeves 3.
COMPANY HYDROFLAME PRO SERIES HYDROFLAME CUSTOM BUILT ™ CUSTOM BUILT Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) CD-0125 Corrugated Deck Concrete Sleeve 1.53” ¼”-3/4” 46 CD-0200 Corrugated Deck Concrete Sleeve 2.19” ¼”-11/4” 46 46 CD-0300 Corrugated Deck Concrete Sleeve 3.33” 1”-2” CD-0400 Corrugated Deck Concrete Sleeve 4.28” 11/4”-3” 46 CD-0500 Corrugated Deck Concrete Sleeve 5.22” 21/2”-4” 46 CD-0600 Corrugated Deck Concrete Sleeve 6.
NOTES FAX: 760-744-0507 1-800-321-0316 www.HOLDRITE.
NOTES UL LISTINGS VISIT www.HOLDRITE.com/hydroflame-firestop-ul-listings/ for listed systems 74 Engineered Solutions www.HOLDRITE.
CONVERTING MAKESHIFT METHODS INTO ENGINEERED SOLUTIONSSM TOLL FREE: (800) 321-0316 FAX: (760) 744-0507 www.HOLDRITE.
STAY UP TO DATE VISIT WWW.HOLDRITE.COM Connect With Us! © 2016 HOLDRITE® All rights reserved Products shown may be protected by U.S. or Foreign Patent or Patents Pending.