HoldRite® Engineered Solutions Products 2019 Firestop re-engineered.
Transforming Firestop Solutions • Telescoping Sleeves, Yes! Eliminate the need to cut sleeves on the jobsite • Locator Whiskers, Yes! Locate buried sleeves after concrete pour • Faster Install, Yes! Up to 6 times faster to install than makeshift methods • Easy to Stock, Yes! Available at a distributor near you • UL Listed Firestop Device, Yes! Meets and exceeds building code requirements • Made in the USA, Yes! 1 2 Lock outer sleeve in place 3 Nail to form deck Remove cap with Safety Cap Tool Pa
ENGINEERED SOLUTIONS
Table of Contents Company Revolutionizing Plumbing & Firestop Solutions ................................................. 6 Converting Makeshift Methods into Engineered Solutions ............................ 7 A Valued Member of the RWC Family of Brands................................................ 9 Transforming Firestop Solutions Through Industry Collaboration ............. 13 Firestop Products HoldRite® HydroFlame™ Sealants, Wraps , Pipe Collars, Putty Pads Why HoldRite® HydroFlame™ Sealants? .......
Revolutionizing Plumbing & Firestop Solutions HoldRite® has been “Converting Makeshift Methods into Engineered Solutions” since the introduction of the #101-18 copper bonded bracket in 1982. That year, the Hubbard family business was born when Master Plumber George Hubbard designed a pipe support solution to replace the time-consuming and labor-intensive method of cutting blocks of wood to support water piping.
Converting Makeshift Methods Into Engineered Solutions Ceiling/Floor Fire Stopping HoldRite® HydroFlame™ Sealants Makeshift Method Engineered Solution Ceiling/Floor Fire Stopping HoldRite® HydroFlame™ Pro Series Makeshift Method Engineered Solution Sink Sink Makeshift Method Engineered Solution FAX: 760-744-0507 1-800-321-0316 www.HoldRite.
FAX: 760-744-0507 1-800-321-0316 www.HoldRite.
A Valued Member of the RWC Family of Brands RWC is a powerful family of innovative brands that deliver, control, optimize and solve to make our customers’ lives easier. As part of the RWC family, HoldRite adds value through providing plumbing and firestop solutions that operate as an efficient system with our other subsidiaries. We own every part of our manufacturing process from concept to delivery, and strive each day to ensure the quality of our products.
Protect Property Against the Spread of Fire, Smoke & Poisonous Gases HoldRite® HydroFlame™ Pro Series UL classified water, smoke, and firestop systems provide a water tight seal while protecting against the spread of fire, smoke and gases. Also, available are water dam and water module accessories for added water-tight requirements. Commonly observed field devised methods may result in providing a dangerous pathway for water, smoke, gas or fire.
Safeguard Property from Water Damage & Mold Heavy rains or hurricanes and other storms, may cause schedule delays and water damage to buildings under construction. Excessive rain often causes costly water damage to ceilings, walls and floors. Water damage may cause significant health concerns and spawn lawsuits regarding mold issues.
Transforming Firestop Solutions Contractor HoldRite® HydroFlame™ Pro Series Interlocking Telescoping Sleeve Design • • • • • • • • • • Eliminate the need to cut sleeves on the jobsite – quick installs 6 times faster install, compared to makeshift methods No caulking or mineral wool required, for most applications Meet and exceeds building code requirements and UL Listed Telescoping sleeve allows height range of 2 ½” to 12” Extension sleeves available for greater than 12” thick slabs Accommodates various p
Through Industry Collaboration Wholesale Distributor • • • • • • • • • Significant new revenue streams Easy to order, stock and inventory Sleeves allow for multiple pipe size ranges and material types to pass through Meets and exceeds building, fire and safety codes – UL Listed Sleeves are clearly labeled and color-coded, for simple selection Quick and easy to order through HoldRite HydroFlame Pro Series typically ship within 48 hours Made in the USA No-charge submittal and specification compliance assista
FBC™ System Compatible* indicates that this product has been tested and monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® pipe fittings. *FBC™ FlowGuard Gold®, BlazeMaster® and Corzan® are licensed trademarks of the Lubrizol Corporation 14 Engineered Solutions www.HoldRite.
Introducing HoldRite® HydroFlame™ Sealants Introducing HoldRite® HydroFlame™ Firestop and Acoustic Sealants, Intumescent Wrap Strips, Intumescent Pipe Collars and Putty Pads You spoke. We listened. At HoldRite, our goal is to understand your perspective so that we can continue to provide you with firestop solutions that exceed your expectations. Previously, our product assortment focused strictly on cast-in-place solutions.
® Sealants, Wraps, Collars & Pads HoldRite® HydroFlame™ 50 Smoke & Acoustic Sealant • • • • • • • • • Easily dispensed using a caulking gun Provides a flexible paintable sealant once cured Meets LEED criteria Low VOC content FBC™ system compatible Easily cleans up with water Clean Air Gold certified High STC Rating 69 2 Year Shelf Life HoldRite® HydroFlame™ 100 Firestop Sealant • • • • • • • • • • • • Flexible (Elastomeric) Low VOC Meets LEED Criteria Paintable Water based Excellent freeze-thaw High ST
HoldRite® HydroFlame™ Pipe Collar • • • • • • Easy and fast installation Labor savings by not having to measure and cut material Highly intumescent Economical solution for plastic pipes FBC™ system compatible Approved for PVC, CPVC, PP, FRPP, ABS, PVDS and PVC/ABS foam core insulations and more • Clean Air Gold certified HoldRite® HydroFlame™ Putty Pads • Possesses intumescent properties; expands when exposed to fire.
HoldRite® HydroFlame™ Sealants Product & Services Directory 18 Sealants Page 19 Pipe Collars Page 22 Putty Pads Page 23 Caulking Guns and Other Accessories Page 25 VIP No Charge Services Page 69 Appendix Page 75 Engineered Solutions www.HoldRite.
HoldRite® HydroFlame™ 50 Smoke & Acoustic Sealant HoldRite® HydroFlame™ 50 is a smoke and acoustic sealant used to seal around penetrations in non-rated horizontal or vertical construction assemblies. Works in conjunction with and compliments HoldRite Silencer™ series noise and vibration dampening systems.
HoldRite® HydroFlame™ 100 Firestop Sealant Type UL Rating Water W Smoke / Gas L Fire F Thermal T* Status *T-Rating when penetrant is non-metallic HoldRite® HydroFlame™ 100 is an elastomeric water based single component non-sag firestop sealant with low intumescent qualities. It is convenient for areas and conditions where dynamic movement is expected.
HoldRite® HydroFlame™ 200 Firestop Sealant Type UL Rating Water W Smoke / Gas L Fire F Thermal T* HoldRite® HydroFlame™ 200 is an elastomeric water based single component non-sag highly intumescent firestop sealant. It is convenient in areas and conditions where dynamic movement is expected.
HoldRite® HydroFlame™ Pipe Collar HoldRite® HydroFlame™ Pipe Collars are prefabricated for open and closed through-penetration firestop systems using 1 -1/2”(38 mm) to 6” (152 mm) plastic pipe. An easy interlocking tab assures fast and easy installation. The design of the collar greatly reduces the time and expense that is required to install competitive collars. Tested in accordance to ASTM E814 or UL 1479 and CAN/ULC-S115 testing standards.
HoldRite® HydroFlame™ Putty Pads HoldRite® HydroFlame™ moldable putty pads are a non-curing single component fire-rated material for membrane-penetration firestop systems. HydroFlame® Putty will intumesce and expand when exposed to heat, forming an insulating char. In the event of a fire, putty pads will prevent the spread of flames, smoke and gas through penetration openings. Putty pads are applied by hand and mixing is never required.
HoldRite® HydroFlame™ Wrap Strips Type UL Rating Smoke / Gas L Fire F Thermal T* Status *T-Rating when penetrant is non-metallic Custom Collar • HF-CC-0100 • HF-CC-0200 HoldRite® HydroFlame™ Wrap Strip is a high performance highly intumescent flexible wrap strip that is designed to expand when exposed to heat. Wrap Strips are intended to be used around combustible pipes and insulated pipes as a solution to seal off these challenging pipes in the event of a fire.
HoldRite® HydroFlame™ Caulk Guns • • • • • Designed for standard viscosity materials Full size handle for comfortable, efficient dispensing Double gripping plate technology for no slipping and long life Convenient rotating swivel barrel Durable sausage pistons prevent bag-wrap HF-CG-20SP | Premium Caulk Gun Shown HoldRite® HydroFlame™ Follow Plates • • • • Neoprene seal can be used with straight & tapered bucket For 2” diameter barrel bulk gun 5 Gal. Diameter- 11.
Transforming Firestop Solutions With The Easy To Stock HoldRite® HydroFlame™ Pro Series The evolution of a lab-tested and UL Listed cast-inplace firestop solution continues with the HoldRite HydroFlame Pro Series. Finally, an easy to specify, stock, order, and install firestop solution is available on wholesale distributors’ shelves throughout North America.
® PRO Product Configuration Locator Whiskers Easily locate buried sleeves after concrete pour (Red, Black or Green) Interlocking Telescoping Sleeve Design Safety Cap Threaded cap allows for easy non-destructive removal.
® PRO Transforming Firestop Solutions TELESCOPING SLEEVES, YES! • Eliminate the need to cut sleeves on most jobsites LOCATOR WHISKERS, YES! • Locate buried sleeves after concrete pour SAFETY CAP, YES! • OSHA compliant hole cover • Threaded design allows for easy removal FOR WOOD OR METAL FORM DECKS, YES! • Telescoping or non-telescoping design FIRESTOP A WIDE VARIETY OF PIPE TYPE & SIZES, YES! • Material type and pipe sizes easily identifiable (1/2” to 6”) SUPERIOR SEAL, YES! • UL W-Rated! INTERLOCK
HoldRite® HydroFlame™ Pro Series Interlocking Telescoping Sleeve Design • • • • • • • • Eliminate the need to cut sleeves on the jobsite Adjust sleeve to desired height 2 ½” to 12” Extension sleeves available for greater than 12” Accommodates various pipe, conduit and cable types and sizes ½” to 6” Non-telescoping design also available at 7 3/4” tall Faster install over traditional methods or other manufactured designs Measurement guide system built into sleeves (US and Metric) Significantly reduces the nu
Reduce Installation Costs with the HoldRite® HydroFlame™ Pro Series Application Cost Savings Analysis Example Install sleeve and firestop for a 2” pipe through an 8” thick concrete slab on a wood form deck. Problematic Plastic Concrete Sleeve Makeshift Method Installation Steps 1. Select 4” sleeve, measure and mark for saw cutting 2. Cut sleeve, in prep for re-assembly to slab height of 8” 3. Build sleeve to height with screw gun, screws and tape 4. Nail sleeve to form deck (concrete poured by others) 5.
HoldRite® HydroFlame™ Pro Series FIRESTOP SLEEVE ADVANTAGES VS.
® PRO 32 Engineered Solutions www.HoldRite.
HoldRite® HydroFlame™ Pro Series Product & Services Directory Telescoping Firestop Sleeves Page 34 Non-Telescoping Firestop Sleeves Page 35 Telescoping Hollow Sleeves (Sleeves Only) Page 36 Non-Telescoping Hollow Sleeves (Sleeves Only) Page 37 Corrugated Metal Deck Plates Page 38 Sleeve Extensions Page 39 Water Modules Page 40 Water Dams Page 41 Tub Boxes Page 42 Aerator Adapters Page 43 Plastic Shower Drain Sleeves Cast Iron Drain Sleeves Page 44 Page 45 Cable and Line Set Sleeves Page 46 C
HoldRite® HydroFlame™ Pro Series Telescoping Firestop Sleeves • Ideal for flat concrete form decks – cast-in-place • Ideal for corrugated metal decks (corrugated deck plate required) • Available for ½” to 6” penetrants – piping, conduit, cables, etc.
HoldRite® HydroFlame™ Pro Series Non-Telescoping Firestop Sleeves • Ideal for flat concrete form decks – cast-in-place • Ideal for corrugated metal decks (corrugated deck plate required) • Available for ½” to 6” penetrants, piping, conduits, cables, etc. • For insulated and non-insulated pipes • 7-3/4” Tall, and can be cut to as short as 2-1/2”.
HoldRite® HydroFlame™ Pro Series Telescoping Hollow Sleeves (Sleeve Only, Firestopping By Others) • UL Listed sleeves, when installed per UL Systems • Firestopping provided by others (no intumescent material included), can achieve 2 or 3-hour F-Ratings • Telescoping design adjusts from 8” to 12”, in ¼” increments. • Cut to as short as 4-1/2”. • Available for ½” to 6” penetrants – piping, etc.
HoldRite® HydroFlame™ Pro Series Non-Telescoping Hollow Sleeves (Sleeve Only, Firestopping By Others) • UL Listed sleeves, when installed per UL systems • Firestopping provided by others (no intumescent material included), can achieve 2 or 3-hour F-Ratings • 7-3/4” Non-telescoping design. Cut to as short as 4-1/2”. • Available for ½” to 6” penetrants – piping, etc.
HoldRite® HydroFlame™ Pro Series Corrugated Metal Deck Plates • For use with concrete pours over corrugated metal decks • Assembles directly to HoldRite HydroFlame Pro Series Firestop Sleeves • Sizes available for 1”, 2”, 3”, 4”, and 6” sleeves • Superior strength and stability • One-piece metal deck solution (*Must be ordered with HydroFlame Pro Series Sleeves) Model Number Penetrating Pipe Type Used With Nominal Penetrant Size Box Qty HFPCD1 Plastic and Metal HFP-P/M1, HFP-P/M1B, HFP-H2, HFP-H2B
HoldRite® HydroFlame™ Pro Series Extension Sleeves • Extends the height of HoldRite HydroFlame Pro Series sleeves by as much as 43/4 in 1/4” increments • No coupling needed for connection to sleeves • Ideal for use on concrete pours over 12” • Available for all HoldRite HydroFlame Pro Series sleeve sizes 4 3/4” • Connects to safety caps, water dams, water modules and underside of sleeves Model Number Fits Firestop Sleeves Fits Hollow Sleeves Nominal Penetrant Size Box Qty HFPE1 #1 Firestop Sleeves
HoldRite® HydroFlame™ Pro Series Water Module • Provides added water protection for HoldRite HydroFlame Pro Series Sleeves • Prevents debris from falling into annular space around piping • Pre-installed prior to concrete pour • Available for all HoldRite HydroFlame Pro Series Sleeve sizes • Adds 1/2” to the overall height of pro series sleeves • Accepts safety cap and other HoldRite HydroFlame Pro Series accessories • UL W-Rated seal, water-tight for most penetrants Type UL Rating Water W* Status Mode
HoldRite® HydroFlame™ Pro Series Water Dams • Adds 2” of overall height to the HoldRite HydroFlame Pro Series Sleeve • Load-rated for riser clamp support – see product spec sheet • Installed after concrete pour and safety cap removal • Impedes water when used with cast-in-place sleeves • Screws onto HoldRite HydroFlame Pro Series telescoping sleeves or water modules Model Number Fits Firestop Sleeves Fits Hollow Sleeves Nominal Penetrant Size Box Qty HFPWD1 #1 Firestop Sleeves #2 Hollow Sleeves 1/4
HoldRite® HydroFlame™ Pro Series Tub Boxes • UL Listed firestop device for bathtub drains • 3 hour F-Rating • Built-in fire, smoke and gas protection • Provides a water tight slab penetration • Accepts 1-1/2” PVC, ABS, and brass drain pipes using appropriate seal plug (provided with HFPTB-TW-0200) • Allows for expansion, contraction and movement • UL W-Rated water seal • Built at 10 ¾” tall • Height can be modified in the field HFPTB-1.
HoldRite® HydroFlame™ Pro Series Aerator Adapter • Provides a recess in the underside of the concrete floor, for fitting access • Available for use with 2”, 3”, 4” & 6” HoldRite HydroFlame Pro Series Sleeve • For use in concrete floors as thin as 5-1/2” • Ideal for Sovent and other high and tight fitting joint access HFPA6 Model Number Fits Firestop Sleeves Fits Hollow Sleeves Nominal Penetrant Size Height Box Qty Prox.
HoldRite® HydroFlame™ Pro Series Shower Drain Sleeve • UL Listed firestop device – 3 hour F-Rating • For 2” shower/floor drains (Drain Not Included) • Allows for a recessed drain body in shower pans and shower stalls • Accepts plastic drain piping • Adjustable height sleeve – up to 14 ¾” slab height • Extensions available Type UL Rating Water W Smoke /Gas L Fire F Status Model Number Penetrating Pipe Type Nominal Penetrant Size Box Qty HFP-SH2-DRN Plastic 2” 6 HFP-SH3-DRN Plastic 2” or 3
HoldRite® HydroFlame™ Pro Series Cast Iron Drain Sleeves • UL Listed firestop device • For no-hub cast iron drains and piping • Mount drain body on top of sleeve and secure to deck • For cast-in-place drains (Drain Not Included) • For Neo-Lock style drain outlets • Extensions available Model Number Type UL Rating Fire F Penetrating Pipe Type Status Nominal Penetrant Size Box Qty HFP-2CI-DRN Hubless Cast Iron 2” 10 HFP-23CI-DRN Hubless Cast Iron 2” - 3” 10 HFP-34CI-DRN Hubless Cast Iron 3
HoldRite® HydroFlame™ Pro Series Cable & Line-Set Sleeves • UL Listed firestop device – 2-3 hour F-Rating • Accepts multiple data, phone, electrical cables, fiber cables, coax, refrigeration line-sets • Accepts cable fill up to 45% • Accepts multiple tubing-water lines, etc.
HoldRite® HydroFlame™ Pro Series Closet Flange Sleeves • UL Listed firestop device – 3 hour F-Rating • Models for 3” or 4” toilet flanges (Flanges Not Included) • For both plastic and no-hub cast iron drain piping • Mid-body seal provides water-tight penetration • Adjustable height sleeve up to 12” • Extensions are available for slabs over 12” Type UL Rating Water W Smoke /Gas L Fire F Thermal T* Status OPS-PL40-0300 (Closet Flange Not Included) *T-Rating when penetrant is non-metallic Model N
HoldRite® HydroFlame™ Custom Built Firestop Solutions – Set It & Forget It! HydroFlame Custom Built Firestop Solutions meet and exceed building code requirements and provide an engineered technology that is UL Listed to deliver the ultimate cast-in-place water, smoke, and firestop performance. From our Nashville, Tennessee manufacturing facility we are able to manufacture and ship custom sleeves for your building project.
® Custom Built CUSTOM BUILT FIRESTOP SYSTEMS Flat Form Deck Sleeve Product Configuration* Safety Cap Custom Built Meets OSHA loading requirements for hole covers Sleeve Riser Unlimited height for ½” - 6” penetrants, built to your specified height Patented Mid-Body Seal Internal and external waterproofing - UL W-Rated Nail-In Base Fast and easy installation with break-away ears on most models, for tight nesting Intumescent Wrap Strip Built-in firestop *Comes pre-assembled to your specified heigh
HoldRite® HydroFlame™ Custom Built Set It & Forget It HoldRite® HydroFlame™ Custom Built is also easy to order. Provide the following key information: 1. What is the penetrating pipe size? 1 2. What is the piping material - PVC, Copper, Cast Iron, Steel, etc? 3. What is the depth of the slab? YOU'RE DONE! 2 3 Easy Installation 50 Engineered Solutions www.HoldRite.
HoldRite® HydroFlame™ Custom Built Product & Services Directory Flat Form Deck Sleeves Page 52 Corrugated Metal Deck Sleeves Page 54 Aerator Adaptor Box Page 56 Tub Box Page 56 Closet Flange Sleeves Shower Drain Sleeves Floor Drain Kit Page 56 Page 57 (Drain Not Included) Page 57 Cable and Line Set Sleeves Page 57 (Flange Not Included) (Drain Not Included) Corrugated Deck Optional Pipe Size Concrete Sleeves Page 58 Corrugated Deck Concrete Sleeves (Sleeve Only-No Water Seal) Page 58 Flat F
HoldRite® HydroFlame™ Custom Built Flat Form Deck Sleeves • • • • • • • • • Mid-body seal provides watertight penetration – UL W-Rated UL Listed firestop device (2 or 3-hour F-ratings) Built-in water, fire, smoke and gas protection Custom cut to your specified height at no extra cost Turn-key installation - no job site modifications required Includes OSHA compliant safety cap/hole cover Allows for expansion, contraction and movement Available 4½” and taller for ½”-6” piping penetrants Reduces piping system
HoldRite® HydroFlame™ Custom Built Flat Form Deck Sleeves Model # Penetrating Pipe Type(s) Pipe O.D. Nominal Penetrant Size PS-CH-0200 Cast Iron - Extra Heavy 2.38” 2” PS-CH-0300 Cast Iron - Extra Heavy 3.50” 3” PS-CH-0400 Cast Iron - Extra Heavy 4.50” 4” PS-CI-0150 Cast Iron - Service Weight 1.90” 1½” PS-CI-0200 Cast Iron - Service Weight 2.30” 2” PS-CI-0300 Cast Iron - Service Weight 3.30” 3” PS-CI-0400 Cast Iron - Service Weight 4.
HoldRite® HydroFlame™ Custom Built Corrugated Metal Form Deck Sleeves • Mid-body seal provides watertight penetration – UL W-Rated • UL Listed firestop device • One-piece construction - no parts, pieces or field modifications necessary • Built-in water, fire, smoke and gas protection • Custom cut to your specified height at no extra cost • Includes OSHA compliant safety cap/hole cover • Allows for expansion, contraction and movement • Available 2½” and taller for ½”-6” piping CUSTOM BUILT 54 Model # Pen
HoldRite® HydroFlame™ Custom Built Corrugated Metal Form Deck Sleeves Model # Penetrating Pipe Type(s) Pipe O.D. Nominal Penetrant Size CD-CH-0200 Cast Iron - Extra Heavy 2.38” 2” CD-CH-0300 Cast Iron - Extra Heavy 3.50” 3” CD-CH-0400 Cast Iron - Extra Heavy 4.50” 4” CD-CI-0150 Cast Iron - Service Weight 1.90” 1½” CD-CI-0200 Cast Iron - Service Weight 2.30” 2” CD-CI-0300 Cast Iron - Service Weight 3.30” 3” CD-CI-0400 Cast Iron - Service Weight 4.
HoldRite® HydroFlame™ Custom Built Aerator Adapter Box • • • • • Provides a recess in under side of slab for fitting access Accepts 3”, 4” and 6” HydroFlame sleeves 3½” tall box For 8” or thicker concrete floors Ideal for Sovent® and other high and tight fitting joint access Model # Pipe Type(s) Nominal Penetrant Size AA-0304 PVC, ABS, No-Hub Cast Iron 3” or 4” AA-06 PVC, ABS, No-Hub Cast Iron 6” HoldRite® HydroFlame™ Custom Built Tub Box • • • • Provides for a watertight slab penetration UL Lis
HoldRite® HydroFlame™ Custom Built Shower Drain Sleeves • • • • • UL Listed firestop device Built-in fire protection Provides a fast and strong drain support For use with 2” PVC drains (drain body and riser pipe not included) Glue 2” PVC pipe into bottom of sleeve base Model # Pipe Type(s) Pipe O.D. Nominal Pipe Size PS-SD-0200 PVC, ccPVC & ABS 2.
HoldRite® HydroFlame™ Custom Built Corrugated Deck Optional Pipe Size Concrete Sleeves • • • • CUSTOM BUILT • • • • UL Listed firestop device Built-in fire protection Custom cut to your specified height at no extra cost Each sleeve accepts a range of pipe sizes between ½” and 6”: ½”-1”, 1¼”-2”, 2½”-3”, 3”-4” or 5”-6” Includes OSHA compliant safety cap/hole cover Allows for movement and off-center piping Reduced time to dry floors and finish building Water-Resistant Mid-Body Seal Model # Penetrating Pip
HoldRite® HydroFlame™ Custom Built Flat Form Deck Optional Pipe Size Sleeves • • • • • CUSTOM BUILT UL Listed firestop device Interior mid-body seal provides water resistant penetration Built-in fire protection Custom cut to your specified height at no extra cost Each sleeve accepts a range of pipe sizes between ½” and 6”: ½”-1”, 1¼”-2”, 2½”-3”, 3”-4” or 5”-6” • Includes OSHA compliant safety cap/hole cover • Allows for movement and off-center piping • Reduced time to dry floors and finish building Model
HoldRite® HydroFlame™ Custom Built Slab & Wall Seal Sleeves CUSTOM BUILT 60 • Mid-body seal provides watertight penetration • Watertight seal helps protect property against water intrusion, mold, insects/termites, methane and radon gas • Allows for expansion, contraction and movement • Available for ½”-6” pipes and conduits • Custom cut to your specified length (specify length when ordering) • For use through walls and slab-on-grade conditions, up to 36” deep • Mid-body seal also available separately • U
HoldRite® HydroFlame™ Custom Built Slab & Wall Seal Sleeves Model # Penetrating Pipe Type(s) Pipe O.D. Nominal Penetrant Size HP-CH-0200 Cast Iron - Extra Heavy 2.38” 2” HP-CH-0300 Cast Iron - Extra Heavy 3.50” 3” HP-CH-0400 Cast Iron - Extra Heavy 4.50” 4” HP-CI-0150 Cast Iron - Service Weight 1.90” 1½” HP-CI-0200 Cast Iron - Service Weight 2.30” 2” HP-CI-0300 Cast Iron - Service Weight 3.30” 3” HP-CI-0400 Cast Iron - Service Weight 4.
Engineered Solutions www.HoldRite.
Specifications & VIP Services FAX: 760-744-0507 1-800-321-0316 www.HoldRite.
HoldRite® HydroFlame™ Pro Series Installation Details Page 64 Engineered Solutions www.HoldRite.
Customized installation detail pages can be created upon request. Visit www.HoldRite.com for individual application drawings. HoldRite® Installation Details FAX: 760-744-0507 1-800-321-0316 www.HoldRite.
HoldRite® HydroFlame™ Custom Built Installation Details Page 66 Engineered Solutions www.HoldRite.
Customized installation detail pages can be created upon request. Visit www.HoldRite.com for individual application drawings. Your company name and/or logo here FAX: 760-744-0507 1-800-321-0316 www.HoldRite.
Update Your Own Plumbing Specification Download HoldRite CSI Division 7 and Division 22 Specifications at HoldRite.com/no-charge-specification-authorship/ HoldRite® is Proud to be an ASPE Affiliate Sponsor and CEU Provider HoldRite now offers the opportunity for plumbing engineers and designers to earn continuing education units (CEUs) for participation in our ASPE approved educational programs. Topics include Plumbing Acoustical Isolation, Pipe Hangers and Supports, and Firestop Systems.
No-Charge VIP Estimating Service HoldRite offers a free consulting service that will provide you with a comprehensive cost savings analysis, based on the cost of materials and installation, resulting from the use of HoldRite products on your key projects. Our VIP Estimating Service includes specification and submittal assistance, 3-D CAD drawings, “installed cost-savings analysis” and “custom installation detail pages.” This NO COST service is available for any project.
HoldRite® HydroFlame™ Online Tools HydroFlame Deck Hole Penetration Calculator CORRUGATED SLEEVE Deck Hole Cutout Center to Center Calculator PIPE SIZE “CUSTOM BUILT” HOLE CUT SIZE “PRO SERIES” HOLE CUT SIZE 1/2” 3 3/16” 2 3/4” 3/4” 3 7/16” 2 3/4” 1” 3 11/16” 2 3/4” 1 1/4” 4” 4” 1 1/2” 4 1/4” 4” 2” 4 3/4” 4” 2 1/2” 5 1/4” 5” 3” 5 7/8” 5” 4” 6 7/8” 6” 6” 9 7/8” 8 1/4” Use our online calculator: https://holdrite.
FAX: 760-744-0507 1-800-321-0316 www.HoldRite.
Engineered Solutions www.HoldRite.
Contact Us Have questions or comments? Need samples, additional product data or a price quote? Reach out to us by phone, fax or email. Our dedicated Customer Support Team is ready to help. We look forward to working with you. Toll-Free: 800-321-0316 | Phone: 760-744-6944 | Fax: 760-744-0507 www.HoldRite.com | sales@HoldRite.com FAX: 760-744-0507 1-800-321-0316 www.HoldRite.
FAX: 760-744-0507 1-800-321-0316 www.HoldRite.
Appendix FAX: 760-744-0507 1-800-321-0316 www.HoldRite.
® SEALANTS, WRAPS, COLLARS & PADS Sealants, Wraps, Collars & Pads Model # Product Description Page(s) HF50-20S Smoke & Acoustic Sealant (White) , 20.2 oz. Sausage 19 HF100-10C Firestop Sealant (Red), 10.3 oz. Cartridge 20 HF100-20S Firestop Sealant (Red), 20.2 oz. Sausage 20 HF100-30C Firestop Sealant (Red), 30 oz. Cartridge 20 HF100-5B Firestop Sealant (Red), 5 Gal. 20 HF200-10C Firestop Sealant (Red), 10.3 oz. Cartridge 21 HF200-20S Firestop Sealant (Red), 20.2 oz.
® PRO SERIES PRO Model # Product Description Penetrant Pipe Size Page(s) HFP-P1 HoldRite HydroFlame Pro Series Telescoping Firestop Sleeves (8”-12”) 1/2” - 1” 34 HFP-P2 HoldRite HydroFlame Pro Series Telescoping Firestop Sleeves (8”-12”) 1-1/4” - 2” 34 HFP-P3 HoldRite HydroFlame Pro Series Telescoping Firestop Sleeves (8”-12”) 2” - 3” 34 HFP-P4 HoldRite HydroFlame Pro Series Telescoping Firestop Sleeves (8”-12”) 3” - 4” 34 HFP-P6 HoldRite HydroFlame Pro Series Telescoping Firestop Sl
® PRO SERIES PRO Model # Product Description Penetrant Pipe Size Page(s) HFPWM4 HoldRite HydroFlame Pro Series Water Modules 3” - 4” 40 HFPWM6 HoldRite HydroFlame Pro Series Water Modules 5” - 6” 40 HFPWD1 HoldRite HydroFlame Pro Series Water Dams 1/4” - 1-1/4” 41 HFPWD2 HoldRite HydroFlame Pro Series Water Dams 1”-2” 41 HFPWD3 HoldRite HydroFlame Pro Series Water Dams 1-1/4” - 3” 41 HFPWD4 HoldRite HydroFlame Pro Series Water Dams 2-1/2” - 4” 41 HFPWD6 HoldRite HydroFlame Pr
® CUSTOM BUILT Custom Built Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) PS-NP-0050 HydroFlame Cast-in-Place Sleeves .840” ½” 52 PS-NP-0075 HydroFlame Cast-in-Place Sleeves 1.050” ¾” 52 PS-NP-0100 HydroFlame Cast-in-Place Sleeves 1.315” 1” 52 PS-NP-0125 HydroFlame Cast-in-Place Sleeves 1.660” 1¼” 52 52 PS-NP-0150 HydroFlame Cast-in-Place Sleeves 1.900” 1½” PS-NP-0200 HydroFlame Cast-in-Place Sleeves 2.
® CUSTOM BUILT Custom Built 80 Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) PS-CI-0300 HydroFlame Cast-in-Place Sleeves 3.30” 3” 53 PS-CI-0400 HydroFlame Cast-in-Place Sleeves 4.30” 4” 53 PS-CI-0600 HydroFlame Cast-in-Place Sleeves 6.30” 6” 53 PS-CX-0150 HydroFlame Cast-in-Place Sleeves 1.90” 1½” 53 PS-CX-0200 HydroFlame Cast-in-Place Sleeves 2.35” 2” 53 53 PS-CX-0300 HydroFlame Cast-in-Place Sleeves 3.
® CUSTOM BUILT Custom Built Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) CD-CP-0150 Corrugated Cast-in-Place Sleeves 1.625” 1½” 54 CD-CP-0200 Corrugated Cast-in-Place Sleeves 2.125” 2” 54 CD-CN-0050 Corrugated Cast-in-Place Sleeves .840” ½” 54 CD-CN-0075 Corrugated Cast-in-Place Sleeves 1.050” ¾” 54 CD-CN-0100 Corrugated Cast-in-Place Sleeves 1.315” 1” 54 54 CD-CN-0125 Corrugated Cast-in-Place Sleeves 1.
® CUSTOM BUILT Custom Built 82 Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) CD-ST-0200 Corrugated Cast-in-Place Sleeves CD-ST-0250 Corrugated Cast-in-Place Sleeves 2.375” 2” 55 2.875” 2½” 55 CD-ST-0300 Corrugated Cast-in-Place Sleeves 3.50” 3” 55 CD-ST-0400 Corrugated Cast-in-Place Sleeves 4.5” 4” 55 CD-ST-0600 Corrugated Cast-in-Place Sleeves 6.625” 6” 55 55 CD-ET-0050 Corrugated Cast-in-Place Sleeves 0.
® CUSTOM BUILT Custom Built Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) HP-CT-0100 Slab and Wall Seal w/ Pipe Inserts HP-CT-0125 Slab and Wall Seal w/ Pipe Inserts 1.125” 1” 60 1.375” 1¼” 60 HP-CT-0150 Slab and Wall Seal w/ Pipe Inserts 1.625” 1½” 60 HP-CT-0200 Slab and Wall Seal w/ Pipe Inserts 2.125” 2” 60 HP-CT-0250 Slab and Wall Seal w/ Pipe Inserts 2.625” 2½” 60 60 HP-CT-0300 Slab and Wall Seal w/ Pipe Inserts 3.
® CUSTOM BUILT Custom Built 84 Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) TB-NP-0200 Cast-in-Place Tub Box N/A 1½” 56 TB-TW-0200 Cast-in-Place Tub Box N/A 1½” 56 AA-0304 Aerator Adapter Box for Wood Form Deck N/A 3” or 4” 56 AA-06 Aerator Adapter Box for Wood Form Deck N/A 6” 56 PS-NPCF-0300 Cast-in-Place Closet Flange Sleeves 3.5” 3” 56 56 PS-NPCF-0400 Cast-in-Place Closet Flange Sleeves 4.
® CUSTOM BUILT Custom Built Model # Product Description Pipe O.D. Penetrant Pipe Size Page(s) CD-0125 Corrugated Deck Concrete Sleeve 1.53” ¼”-3/4” 58 CD-0200 Corrugated Deck Concrete Sleeve 2.19” ¼”-11/4” 58 CD-0300 Corrugated Deck Concrete Sleeve 3.33” 1”-2” 58 CD-0400 Corrugated Deck Concrete Sleeve 4.28” 11/4”-3” 58 CD-0500 Corrugated Deck Concrete Sleeve 5.22” 21/2”-4” 58 58 CD-0600 Corrugated Deck Concrete Sleeve 6.
NOTES UL LISTINGS VISIT www.HoldRite.com/hydroflame-firestop-ul-listings/ ® Sealants, Wraps, Collars & Pads Sealants, Wraps, Collars & Pads Sealants Page 19 86 Engineered Solutions Pipe Collars Page 22 www.HoldRite.
TOLL FREE: (800) 321-0316 FAX: (760) 744-0507 ® www.HoldRite.
Solutions to Shape the World™ Stay up to date visit www.HoldRite.