Use and Care Guide

56
Engineered Solutions www.HoldRite.com 1-800-321-0316 FAX: [phone]
HoldRite
®
HydroFlame™ Custom Built Tub Box
• Provides for a watertight slab penetration
• UL Listed firestop device
• Built-in water, fire, smoke and gas protection
• Strong and simple installation - no need for fire caulking or
mineral wool
• Device accepts PVC, ABS and brass drain pipes using the
appropriate seal plug provided
• Allows for expansion, contraction and movement
Model # Penetrating Pipe Type(s) Pipe O.D. Nominal Penetrant Size
TB-NP-0200 Sch.40 Bath Drains 1.9” 1½”
TB-TW-0200 Thin Wall & Brass Bath Drains 1.5” 1½”
*Add (-4) for 4” Styrofoam foam pad.
HoldRite
®
HydroFlame™ Custom Built Closet Flange Sleeves
Model # Penetrating Pipe Type(s) Pipe O.D. Nominal Penetrant Size
PS-NPCF-0300 PVC, ccPVC & ABS 3.5” 3”
PS-NPCF-0400 PVC, ccPVC & ABS 4.5” 4”
PS-CICF-0300 Cast Iron - Service Weight 3.30” 3”
PS-CICF-0400 Cast Iron - Service Weight 4.30” 4”
PS-CXCF-0300 Cast Iron - Hubless 3.35” 3”
PS-CXCF-0400 Cast Iron - Hubless 4.38” 4”
OPS-PL40-0300 *PVC 4x3 Closet Flange 3.5” 3”
*Sleeve is made with 4” schedule 40 PVC to accept a 4x3 closet flange glued to riser.
• Mid-body seal provides watertight penetration
• UL Listed firestop device
• Strong and simple installation for 3” and 4” flanges
(closet flange not included)
• Device accepts PVC, ABS or no-hub closet flanges
• Built-in water, fire, smoke and gas protection
• Specify closet flange type when ordering
HoldRite
®
HydroFlame™ Custom Built Aerator Adapter Box
Model # Pipe Type(s) Nominal Penetrant Size
AA-0304 PVC, ABS, No-Hub Cast Iron 3” or 4”
AA-06 PVC, ABS, No-Hub Cast Iron 6”
• Provides a recess in under side of slab for fitting access
• Accepts 3”, 4” and 6” HydroFlame sleeves
• 3½” tall box
• For 8” or thicker concrete floors
• Ideal for Sovent
®
and other high and tight fitting joint access
CUSTOM BUILT
CUSTOM BUILT