Brochure
22
Engineered Solutions www.HOLDRITE.com 1-800-321-0316 FAX: 760-744-0507
HOLDRITE® HYDROFLAME™ PRO SERIES
TELESCOPING FIRESTOP SLEEVES
• Ideal for flat concrete form decks – cast-in-place
• Ideal for corrugated metal decks (corrugated deck plate required)
• Available for ½” to 6” penetrants – piping, conduit, cables, etc.
• For insulated and non-insulated pipes
• Telescoping design adjusts from 8” to 12”, in ¼” increments
• Cut to as short as 2-1/2”
• Black base and black whiskers identifies metal piping system
• Red base and red whiskers identifies plastic or metal piping system
• Includes locator whiskers, to locate buried sleeves and to identify
pipe type (metal or plastic)
• Dimensions on sleeves allows for simple height adjustments
• Safety caps meet OSHA hole cover requirements
• UL Listed firestop devices (2 or 3 hour F-ratings)
• Meets and/or exceeds building code requirements
• Built in fire, smoke, gas and water protection
• UL W-Rated seal, water-tight for most penetrants
• Allows for contraction, expansion, movement and off-center pipes
• Reduces piping system noise transfer by maintaining annular spacing
• Interlocking base capability assists with layout alignment
• Extensions available for slabs over 12”
• A variety of accessories are available
• UL 50 Pa Ratings
Model Number Penetrating Pipe Type Nominal Penetrant Size Box Qty
HFP-P1 Plastic and Metal 1/2” - 1” 10
HFP-P2 Plastic and Metal 1-1/4” - 2” 10
HFP-P3 Plastic and Metal 2” - 3” 10
HFP-P4 Plastic and Metal 3” - 4” 10
HFP-P6 Plastic and Metal 5” - 6” 2
HFP-M1 Metal 1/2” - 1” 10
HFP-M2 Metal 1-1/4” - 2” 10
HFP-M3 Metal 2” - 3” 10
HFP-M4 Metal 3” - 4” 10
HFP-M6 Metal 5” - 6” 2
Type UL Rating Status
Water W
Smoke ⁄Gas L
Fire F
Thermal T*
*T-Rating when penetrant is non-metallic
1
5
2
6
3 4
Cut inner and outer sleeve
if desired height is under 8”
Remove cap with Safety Cap
Tool or break out with hammer
Lock outer sleeve in place
Install pipe
Re-install cap & insert whiskers Nail to form deck
COMPANYDISTRIBUTION & SHIPPINGAPPENDIX HYDROFLAME PRO SERIESHYDROFLAME CUSTOM BUILTSPECIFICATIONS & VIP SERVICES