Use and Care Guide

Quick strap

Expansion Tank Brackets

• Secures tank to wall and takes weight load off pipes

• Galvanized and stainless steel construction

• QS-5 Supports tanks up to 9” diameter

• Includes mounting bracket, (2) support straps, and

#8 x 1½” mounting screws

• Secures tank to wall and takes weight load off pipes

• Galvanized and stainless steel construction

• QS-12 Supports tanks from 9½” to 13” diameter

• Includes mounting bracket, (2) support straps, and

#8 x 1½” mounting screws

Model# Description Box Qty Pallet Qty

QS-5 Up to 2.5 Gallons; Up to 9” Diameter 15 120

QS-12 Up to 5 Gallons; Up to 9.5” to 13” Diameter 15 120

QUICK STRAP® QS-5

Expansion Tank Mounting Brackets

QUICK STRAP® QS-12

Expansion Tank Mounting Brackets

QUICK STRAP® QS-5

QUICK STRAP® QS-12

BRACKET

www.HOLDRITE.com 1-800-321-0316

PAGE 1
Quick strap® Expansion Tank Brackets QUICK STRAP® QS-5 QUICK STRAP® QS-12 BRACKET QUICK STRAP® QS-5 Expansion Tank Mounting Brackets • Secures tank to wall and takes weight load off pipes • Galvanized and stainless steel construction • QS-5 Supports tanks up to 9” diameter • Includes mounting bracket, (2) support straps, and #8 x 1½” mounting screws QUICK STRAP® QS-12 Expansion Tank Mounting Brackets • Secures tank to wall and takes weight load off pipes • Galvanized and stainless steel construction •
PAGE 2
Quick strap® Expansion Tank Brackets INSTALLATION INSTRUCTIONS Step 1: Orient mounting bracket vertically. Locate and mark two mounting holes at least 4” apart. Place one hole above upper strap slots in bracket and the other hole below lower strap slots. FIGURE 1 Step 2: Drill pilot holes approximately 1/16”- 3/32” for included screws. For hollow wall or concrete, install appropriate anchors at locations marked in Step 1 (Figure 1). Install screws or anchors.