Quick Strap Spec Sheet

Carriage Bolt, #3/8-16 x 3.0" long
3/8" Hex Nut
J-Clip
Strap
1 1/2"
38"
Lag Bolt, #1/4-10 x 2-1/2" Long
ALL DIMENSIONS IN INCHES
800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_QS-50_RevK
PRODUCT SPECIFICATION DRAWING
QUICK STRAP® #QS-50
Seismic support for water heaters
The QUICK STRAP® #QS-50 is a seismic/earthquake support system for
water heaters up to 80 U.S. gallons in size. The system includes: (4) Straps,
(4) Lag Bolts, (4) J-Clips, (2) 3/8" Carriage Bolts and (2) 3/8" Hex Nuts. The
Quick Link® system allows for full adjustment from the front side of the
water heater.
Product Information:
Material: Strap, 24 gage CRS, galvanized •
California Division State Architect (DSA) approval #97-010 •
UPC / IPC / IAPMO listed •
THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT
TO CHANGE WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN
PART OR WHOLE WITHOUT WRITTEN AUTHORIZATION.