How to Guide

24"
74"
24"
3.75"
Vent Cap available, to cover opening.
(Not included)
HARDWARE
#7 x 7/16"L Phillips Pan Head
Sheet Metal Screws
(Included / Qty as Required)
Rear Panel
(-B Models ONLY)
#E24-B Model Shown
800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_QuickShed_E24/-B_E26/-B_E30/-B_E36/B_RevG
PRODUCT SPECIFICATION DRAWING
QUICK SHED #E24/E24-B, #E26/E26-B, #E30/E30-B & #E36-B
Water Heater Enclosures for 24", 26", 30" & 36"
(-B indicates Models that include Back Panel)
The HOLDRITE® QUICK SHED™ Water Heater Enclosures are constructed of galvanized steel and
provide protection for water heaters installed in outdoor locations. Anchor points at the rear of the
enclosure allows for optional attachment to the adjacent building structure. Rear panel (-B version
ONLY) provides a four-sided enclosure.
Product Information:
Material: •
Top, Door, Left & Right Side and Rear Panel (Opt): .018" - .021" Thick, Galvanized CRS
Back Brace & Beam: .023" - .026" Thick, Galvanized CRS
Handle: 16GA, Galvanized CRS
Material (#E36-B ONLY): •
Top, Door, Left & Right Side and Rear Panel: .025" Thick, Galvanized CRS
Back Brace & Beam: .030" Thick, Galvanized CRS
Handle: 16GA, Galvanized CRS
Weight (without Packaging & Water Heater): •
Model #QS-E24 = 39 LBS / E24-B = 50 LBS •
Model #QS-E26 = 42 LBS / E26-B = 54 LBS •
Model #QS-E30 = 49 LBS / E30-B = 63 LBS •
Model #QS-E36-B = 107 LBS •
Outside dimensions: •
Model #QS-E24 = 24" x 24" x 74" •
Model #QS-E26 = 26" x 26" x 74" •
Model #QS-E30 = 30" x 30" x 74" •
Model #QS-E36 = 36" x 36" x 84" •
Water Heater Dimensions: •
QS-E24: Up to 40 gallons or 22" diameter by 68" high •
QS-E26: Up to 40 gallons or 24" diameter by 68" high •
QS-E30: Up to 80 gallons or 27" diameter by 68" high •
QS-E36: Up to 120 gallons or 33" diameter by 78" high •
THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT
TO CHANGE WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN
PART OR WHOLE WITHOUT WRITTEN AUTHORIZATION.