Use and Care Guide

HOLDRITE ProGuard
®
– Protect Your Stub-Out HOLDRITE.com • [phone]
HOLDRITE ProGuard
®
Installation Instructions
HOLDRITE ProGuard
®
#734 Installation Instructions
HOLDRITE ProGuard
®
#731 Installation Instructions
2
Secure #734 clamps at desired
positions with rear nut
3
Slide ½" tubing through clamp
1
Secure bracket to studs using
two screws/nails at each end
4
Bend PEX into clamp. Then tighten
front nut
Repeat for second clamp and
installation is complete
5
2
Secure #731 clamps at desired
positions with rear nut
3
Slide 1/2" tubing through clamp
1
Secure bracket to studs, using
two screws/nails at each end
4
Secure tubing by tightening
front nut
Repeat for second clamp and
installation is complete
5