How to Guide

#TRPVCNH4A Shown
See Dim "B"
See Dim "C"
A
A
See Dim "A"
See Dim "D"
SECTION A-A
PRODUCT SPECIFICATION DRAWING
TESTRITE® #TRPVCNH2A thru #TRPVCNH6A
Combination Test Tee & Cleanout Plug
800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_#TRPVCNH2A thru #TRPVCNH6A (Rev D)
THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT TO CHANGE
WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN PART OR WHOLE WITHOUT
WRITTEN AUTHORIZATION.
The TESTRITE® TEE installs in-line between DWV Pipe sections and allows the DWV
line to be temporarily blocked for testing (available in 2" - 6"). The TESTRITE TEE includes
a TEST and CLEANOUT PLUG which remains in the pipe system after test. It is designed
to be used with the removable & reusable TESTRITE TEST WEDGE, which allows
temporary blocking of the DWV stack for testing while providing connections for convenient
system fill and drain. Drain flow may be interrupted, e.g., for partial tests, by opening and
closing an integral valve in the TEST WEDGE. The TESTRITE TEE may be used vertically
or horizontally. Install as with any normal fitting. Follow manufacturer's instructions for
testing. Remains in the system as a cleanout.
Product Information:
Material: •
Cleanout Tee: PVC, Black
Cleanout Plug: NYLON 6/6
Spanner Ring: PVC, Black
Complies with ASTM-D2665; compatible with cast iron •
fittings per ASTM-A888
Pressure ratings up to 50' head of water / 5 psi (air): •
2" thru 4" up to 50' head, 6" up to 30' head
UPC / IAPMO / IPC •
Test device sold separately. •
Patents issued and Patents Pending •