Instructions / Assembly

43
ASSEMBLY
Final Check
After all adjustments have been made, shift through every gear several times at
varying speeds. This will ensure all your adjustments are correct and will allow
you to pinpoint any trouble areas. If you encounter any problems, refer to the
appropriate section and make any necessary adjustments.
Check the tire pressure and inflate each tube to the recommended psi as
stated on the sidewall of the tire.
Check that the kickstand operates smoothly and the kickstand bolt is secured
tightly.
Finally, examine the bicycle. Make sure all accessories are attached and all
quick releases, nuts and bolts have been tightened securely.
Correct maintenance of your bicycle will ensure many years of happy riding.
Service your bicycle regularly by referring to the relevant sections of the
manual, OR take it to a professional bicycle shop.
Remember: Always wear helmet and obey all traffic laws.
Do not over-inflate the tires.